Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
FEATURES
4-5 times stronger than annealed glass of the same thickness.
Stronger resistance to thermal...
Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
FEATURES
4-5 times stronger than annealed glass of the same thickness.
Stronger resistance to thermal...
Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
FEATURES
4-5 times stronger than annealed glass of the same thickness.
Stronger resistance to thermal...
Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
FEATURES
4-5 times stronger than annealed glass of the same thickness.
Stronger resistance to thermal...
Clear float glass is made of molten glass which flows through tweel to a tin bath and then to the lehr. While floating through the molten tin, the combination of gravity and surface tension results in smooth and flat surface on both sides.
Clear Float Glass Product Characteristic:
1 Smooth and flat surface and good vision
2 Excellent optical...
R422D is a refrigerant gas which can be used easily.Its ODP (ozone-depleting potential) is 0.
It can replace R22 directly and use in mesothermal and low temperature refrigeration equipment,including commercial supermarket system, air-conditioning and water-cooled units.
Product: Mixed Refrigerant R422d
Property of chloride : ...
Overview
In the radiation crosslinked polyolefin foam (IXPE) of the original satin adhesive bonding process to deal with paper or polyester, non-woven fabrics, and therefore suitable for electronic products, sealing materials or fixed with adhesive tape material.
Applications
For LCD module (drawing board) and LCD TV display (glass / plastic...
Type:CrusherInput Size:630/810mmOutput Size:80~250mmProcessed Materials:used for crushing hard material, for example, pebble, basalt, marble, granite.Applications:Crusher ...
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.
