Diamond Tool for genuine diamond polished.
Diamond Tool has lower wearability than TSP Series. Compared to genuine diamond, it not only has much high grinding efficiency, but the price is much lower. Therefore, it is the first choice for demand processing nowadays. The engineers of Sanhe corp. can control the wearability of polycrystalline diamond accurately for different industrial purposes.
The range of dimension
Diameter(D)
Height(H)
Max value of H/D
1~17mm
1~15mm
6
Introduction: If the polycrystalline diamond is not columniform, the diameter of circumcircle can be used for approximate calculation.
The specification of common use of PCD Series:
| D is the diameter. H is the height. A is the point angle,includes 90 o120 o and 180 o. All the units of dimension is mm. |
Index | Spec.(D x H x A) |
R3080120 | Φ3x8x120o |
R3080180 | Φ3x8x180o |
R40100120 | Φ4x10x120o |
R40100180 | Φ4x10x180o |
R50100120 | Φ5x10x120o |
R50100180 | Φ5x10x180o |
R60100120 | Φ6x10x120o |
R60100180 | Φ6x10x180o |
R8010180 | Φ8x1x180o |
R8015180 | Φ8x1.5x180o |
R8020180 | Φ8x2x180o |
R10015180 | Φ10x1.5x180o |
R10020180 | Φ10x2x180o |
