high voltage synchronous motors
Power ranges:400kw-10000kw
Voltage ranges: 6kv or 10kv
Speed ranges: 75rpm to 1500rpm

high voltage synchronous motors

Power ranges:400kw-10000kw

Voltage ranges: 6kv or 10kv

Speed ranges: 75rpm to 1500rpm

T(TD) series of synchronous motors are applied to drive fan, water pump, motor-generator set, frequency changer set and other universal machinery.

TK(TDK) series of synchronous motors are designed especially for air compressor and are suitable for refrigeration and chemical machinery.

TZ(TDZ) series of synchronous motors are mainly used for driving steel rolling equipment, also can be used to drive DC motor to assemble a converter set.

TM(TDMK) series of synchronous motors are mainly used for driving ball grinding mill,crusher,grate mill,rod mill,coal mill and other mill.

TL(TDL) series of synchronous motors are applied to drive axial flow pump or centrifugal pump.

These design parameters of synchronous motors are optimized by computer. All series of synchronous motors are made of new materials and with new technology, which ensure their reliable performances. Moreover, they also have the advantages of low temperature rise, low loss, high efficiency, excellent manufacture, small vibration, large starting torque, simple structure, convenient repair, etc.

The motor is allowed to be started directly at full voltage.

If the user's power grid capacity is not enough, can be properly reduced voltage starting, or use the soft start method.

The technical requirements of these series of synchronous motors, except pointed out in the technical specification of the products, are all conformed to the National Standards, GB755 General Requirements for Rotating Electrical Machines, and the standard of IEC (International Electrotechnical Commission).

The Mechanical dimensions and tolerance of all components are conformed to the National Standards, GB1800-1804, and the ISO standards.

According to GB4942.1 and IEC34-5(Degrees of Protection Provided by the integral design of rotating electrical machined(IP code)-Classification.IDT)the Degrees of protection of the enclosure of these series of synchronous motors is IP00, IP20, IP21, IP23 or IP44. 

According to GB1993 and IEC34-6(Cooling methods for rotating electrical machines), the cooling methods of these series of synchronous motors are IC01, IC27, IC37, IC81W or IC91W.

The type of mounting of these serial synchronous motors is conformed to GB997 and IEC34-7(rotating electrical machines-Classification of types of construction, mounting arrangements and terminal box position for (IM code)) .

Other Degrees of protection, cooling methods or type of mounting may be determined between the agreement of the buyers and sellers, if they are needed.