mifare1 card reader, read Card ID or sector,can used in access control and ELEVATOR control,proposal for hotel,building etc.

JBC326 is one kind of Mifare1 IC reader which is used in elevator and access controller, it has 1 group of output cable to connect with controller, can transfer wiegrand34 data(4 door access controller) and wiegrand66 data(elevator controller).
1. Compatible with all kinds of Mifare1 cards.
2. Supply 1 group of wiegrand interface to transfer card ID,
authorization and etc information.
3. Integrate time Chip
4. Buzzer hint
5. Power Supply: AC12V/1A
6. Working environment: 0-70
7. Dimention:125*125*20mm
8. Weight:<300g
9. Color: Black and white
10. 6 dip code represent device type and access place No.

11. Store blacklist in memory, process cards with different type
Card Type and function In Management:
1. Mifare1 card, support ISO1443A Standard
2. Data format: wiegrand34/66 optional
3. can select wiegrand66 to output appointed content of sector of cards
4. can also select RS485 to output data
Card type
1) Guest Card: Can use corresponding floor button of the elevator, and open
corresponding door of the room
2) Staff card:
Floor key: use to manage floor and room
Master key: with this card can use all floors of the elevator, open all doors of the
room, and can resume the state of the relay after the emergency situation
Emergency key: under emergency situation like fire alarm and etc , can use this
card to open all floors and rooms.
3) Set Key
Set key 1: set reading sector, block and password
Set key 2: set time of public place
Set key 3: set access group No of the reader
Set key 4: add blacklist
Set key 5: delete blacklist
Set key 6:initial the device
Set key 7: synchronize time