1) Full inspection of function
2)High quality original chip
3)Custom services available
4)Urgent(express) services available

 

Printing Contact IC cards

 

 

specification:

Material: white PVC,or environmentally friendly material PET,ABS,PLA.

Dimension: 86*54*0.82 ± 0.02 mm

Printing: 4C/4C or blank.

Custom effect: Laser, gold/silver, embossing, Laser No. Serial No. Scratch and signature Panel

 

Specification of Chip

Memory: 1K byte

Security features: password needed when write info into cards.

Programming Time:2.5ms

Date Retention:10 years

Write/Erase Cycles: > 10,000 

Protocol Standard: ISO 7816 

Application: health care, insurance,database, charge system( Internet bar, High-way), E-Wallet

 

Introduction of Contact smart cards

Contact smart cards have a contact area of approximately 1 square centimetre (0.16 sq in), comprising several gold-plated contact pads. These pads provide electrical connectivity when inserted into a reader.

The ISO/IEC 7810 and ISO/IEC 7816 series of standards define:

physical shape and characteristicselectrical connector positions and shapeselectrical characteristicscommunications protocols, including commands sent to and responses from the cardbasic functionality

 Cards do not contain batteries; power is supplied by the card reader.

 

Contact card reader

 

Contact smart card readers are used as a communications medium between the smart card and a host (e.g., a computer, a point of sale terminal) or a mobile telephone.

Because the chips in financial cards are the same as those used in Subscriber Identity Modules (SIMs) in mobile phones, programmed differently and embedded in a different piece of PVC, chip manufacturers are building to the more demanding GSM/3G standards. So, for example, although the EMV standard allows a chip card to draw 50 mA from its terminal, cards are normally well below the telephone industry's 6 mA limit. This allows smaller and cheaper financial card terminals.