Vehicle long distance RFID tag
EPC Class 1 GEN2
door access control
chip available: 860~960Mhz
data storage time: 10 years

Vehicle long distance RFID EPC Class 1 Gen 2 tag

Fully compliant with ISO 18000 6a, 6b, 6c and EPC Class1 Gen2 protocol using external MCU

EPC Class1 Gen2 framing support using low cost 8-Bit microcontrollerDirect data mode in the frequency range of 860 to 960 MHz enables propriety Protocol supportInternal power amplifier with level controlled 20dBm for short range applications (only available on the AS3991)Modulator using ASK or PR-ASK modulationAdjustable ASK modulation indexAutomatic selection between I and Q Signal ensuring no “communication holes”Built-in reception low-pass and high-pass filters having selectable corner frequenciesOn chip VCO and PLL covering complete RFID frequency range and frequency hopping supportSelectable receiver gain with AGCSupported link frequencies from 40 up to 640kHz

Printing Option

 -Full color printing

-Laser printing 

 

Package

For card: Size: 85.5mm*54mm*0.84mm 200pcs/box. 10box/ctn.
Box size: 6*9.3*22.5cm Carton size: 13*23.5*50cm
For tag: roll package or individually

 

Sample Available

If make sample according to your artwork, then need to pay for the sample charge.

 

IC available at 125KHz nominal:

TK4100, EM4100, EM4102, EM4450,NXP Hiatg1, Hitag2, HitagS256, HitagS2048, Atmel temic 5567, Rfid access card, Proximity card, ID card, KEY TAG, KEY CARD, Rfid Key fobs & tags 

 

IC available at 13.56MHz nominal

NXP Mifare1 S50, Mifare1 S70, Desfire MF3ICD40, Mifare Ultralight, Icode1, Icode Sli , Legic mim256, JWL872, TI256, TI2048INSIDE picopass 2KSR7 versions is for dual interface card, to add another contact chip, available to punch a slot

 

IC chip at UHF(ISO18000-6B, 6C)

UCODE EPS G2(GEN2), NXP XM/XL;AlieN H2/H3; Impinj m2/m3

 

Notice

The showing picture is only for reference of our product. All related to intellectual property rights of trademark belongs to trade mark companies.