RF Controller System
Voltage: DC/AC 12V 24V
Frequency: 433.92MHZ
Modulation: ASK
Decoder: HCS301 rolling code
RF Controller System
Voltage: DC/AC 12V 24V
Frequency: 433.92MHZ±0.5
Modulation: ASK
Decoder:HCS301 ROLLING CODE
CONNECTION:
J1: electrical source input
J2:channel 2, lock option, it’s in lock state when short circuit(defaulted)
J3:Learning button, short press it(Note: you can only learn one remote by one press.) and LED2 lights, twice press the original remote,LED2 extinct,
Learning code succeeds. Remove original code: press J3 for 8 seconds and then release, LED 2 flashes 4 times, this is indicates the code has been removed.
LED1: state indicator, it’ll light when receiving same signal or same signal or same manufacture code.
1N1/OUT1: input and output of channel1.
1N2/OUT2: input and output of channel 2.
Antenna: in order to receiver better signal, please pull out the antenna, and keep at least 5cm away from metal object.
OPERATION:
Short press the first button of the remote, the first channel of the receiver will transmit signals for one second; if you keep pressing the button, the receiver will keep transmitting signals until you release the button.A. When J2 is in unlock state: short press the second button of the remote, the second.Channel of the receiver will transmit signals for one second , if you keep pressing the button,.
The receiver will keep transmitting signals until you release the button.
B. When J2 is in lock state(short circuit) : short press the second button of the remote, the second channel of the receiver will keep transmitting signals; short press again to stop it.