Tripod turnstile gate
Fingerprint access control gate
Size:1820*280*1050mm
Material: 304 burshed stainless steel
Fingerprint Access Control Turnstile Gate Feature & Advantages:
The turnstiles are easy to install and integrate with virtually any access or indentification system.
1. Single/double walkway--- Controlled in one direction or both
2. VFD flow Signals (on each end of turnstile): Green Arrow Lane closed and Red Cross Lane open
3. Multi voice player
4. Ensures rapid, efficient and safe access control, a valid lock action can allow one passage at one time. The turnstile will unlock when a valid signal is received, and it will lock automatically if passage through. The turnstile is not completed within pre-set time, and the set time can be adjusted via parameter change
5. Installed in indoor or outdoor
6. Well lightning and grounding
7. Muti-working mode: Forbidden, Controlled or Free Passing optional
8. Emergency configuration: The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency
9. Easily integrated with any type of readers: Such as Magnetic card, Barcode card, ID Card, IC Card and so on
10. Card-swiping memory function
11. Statistics collection automatically
Technical Characteristics:
| 1 | Size | 1820×280×1050(mm) |
| 2 | Length of arm | 540mm |
| 3 | Passage Width | 560mm |
| 4 | Height of arm from the ground | 850mm |
| 5 | G.W. | 160KG |
| 6 | Housing Material | 2mm 304 grade stainless steel |
| 7 | Power Supply | 220/110AVC±20%,50HZ |
| 8 | Power consumption | 260w |
| 9 | Working Temperature | -10°c ~50°c |
| 10 | Working Humidity | 20%~90% non-condensing |
| 11 | Passing Efficient | 40-45person/minute/unit |
| 12 | Signal display | VFD operational screen with voice |
| 13 | Service Life | Above 5million continuous opening and closing |
| 14 | Time for fingerprint collecting | 600 millisecond |
| 15 | Time for fingerprint comparison | 600 millisecond |
| 16 | Interface | TCP/IP or RS232/422 or switch signal |
| 17 | Card reader | 1D & 2D Barcode or RFID Card |
Equipment Consists:
1.Mechanism
2.Housing
3.Controller
4.VFD flow signal
5.VFD operational screen display
6. Voice player
7. Tripod Arm
8. IPC(Industrial Personal CP)
9. RFID/Barcode Reader
10. Fingerprinter collecotor
11. Power Supply
