1.The adhesive ratio 100:25
2.Good sealing and easy to operate.
3.Attend auto exhibition
4.Best for air filter
Two-component polyurethane adhesive for machine component proportion ratio is 100:25 | ||
| Material-A | Material-B |
Weight | Small barrel :25KG | 6.25KG |
Big barrel :50KG | 12.5KG | |
Physical nature | orange-red viscous liquid (color based on your request to configure) | brown-yellow liquid |
viscosity | 800-1000MPa.S(25°C) | 25-50MPa.S(25°C) |
density | 1.02g/ml | 1.02g/ml |
package | Plastic bucket or Tin bucket | Plastic bucket ,Tin bucket, Plastic pots |
storage | 1. Material-A and material-B can store up 3-6 months. | |
2. To appropriate indoor storage above 15°C | ||
Usage:
1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.
1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until
2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation
3.Material temperature controlled 24°C-28°C appropriate then you can start operation.
4. Must be clean before using the mould release agent (Note:
The new plastic mould can be wiped free)
5 .If A and B is not reaction please measuring A and B ratio.
6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal
HTTP:Anping sanlian filtering equipment Co.,LTD
Http://cnfilteradhesive.en.alibaba.com
Address: Hebei Province Anping County, Hengshui City, Hebei Filter City
Welcome to the information obtained from the sample to facilitate you yo test the adhesive properties,to make the right purchasing decisions to save money
