Welcome to B2BAGE
GASKET MAKER SEALANT
GASKET MAKER SEALANT

Minimum Order: 0
Quality/Safety Certification: 0.00


Gasket Maker
RTV Gasket Maker
Acetic& Neutral RTV Gasket Maker
Silicone Gasket Maker
GASKET MAKER SEALANT

 

 

                                                                                                                                                      PRODUCT    DESCRIPTION                                                                                                                                                  SBOND 588TM  RTV Silicone Gasket Maker provides  the following product characteristics:     

TechnologyMoisture
Chemical Type                                                         Resin /Isopropanol /  Fillers                                               
AppearanceSmooth;Brightness;no collapse
ComponentsOne part - requires no mixing
Viscosity High
CureAcetic Cure
Application

Gasket or sealing                                                                   

Product Benefits

Easy application
Increases reliability at high temperatures

Cuts repair time
Reduces breakdowns
Resistant to wide range of oils,fuels, lubricants and chemicals
 Seals pressures up to 34 MPa

 SBOND 588TM  RTV Silicone Gasket Maker is a fast cure RTV Gasket Maker.It remains

pliable and flexible and is designed to seal flanges, threaded connections and  fasteners  at  temperatures from -45 °C to +315 °C. It can be effectively applied to cork, paper, plastic and metal surfaces.
Typical applications

sealing gaskets;

flanges and threaded connections;

aircraft heating systems;

manifolds;

pipefittings;

steam lines;

gear boxes and cover plates.

 

Directions for use
1. Clean and dry all surfaces.
2. Apply SBOND 5972™ onto both surfaces and spread with spatula or putty knife.
3. Assemble parts immediately while still wet. Secure or tighten to recommended torque specifications.
4. Allow 3 to 5 hours before using equipment.
5. Re-torque will not be necessary after the product has cured.

 

Storage
Store product in the unopened container in a dry location. 
Storage information may be indicated on the product container labeling.
Optimal Storage:  8 °C to 21 °C.  Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during
use.  Do not return product to the original container.  HANGZHOU FENGLEI INDUSTRIAL CO.,LTD cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required,
please contact your local Technical Service Center orCustomer Service Representative.

     

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.