paper Cold Glue(Water-based ) for BOPP, PET, PVC and other film and good ink adhesion fastness.

  paper Cold Glue(Water-based )

 Features:

 1, for BOPP, PET, PVC and other film and good ink adhesion fastness.

 2, composite materials brightness is good, pictorial realism, never change color, no white mist.

 3, composite materials loyal to the color, hue does not change the ink.

 4, can be adapted to gilt, Indian gold, silver and India. Composite products rolling line, rolling bump would remain unaffected.

5, green environmental protection product, no poison, no pollution, no stimulation to skin, non-flammable non-explosive.

 6, no heating.

 7, a small amount of glue, process adaptability, anti-skinning a long time.

 8, freeze-thaw stability, can continue to use after thawing ice, winter will not be affected.

Technical parameters:

 Solid content, 35% (can add water 10 % do not over it )

 Appearance: White thick liquid

 PH value: 7 ~ 8

 Viscosity: S50 ~ 60 (Tu 4 # cup)

 Shelf Life: 6 months

 Packing: plastic drum rubber lining bag, barrel 50KG

Operating essentials:

 First, the glue size, pressure combined pressure of the size and speed is the speed of the three coated plastic operation process elements, these three of the coordination, harmonization, with a direct impact on the quality of composite materials.

 1, speed: water-based adhesive coating, prior to the renewal of paper workers are able to work circumstances, the more quickly a good speed. First, because the glue more evenly, and second, to reduce plastic membrane stays in the air after time, to prevent the surface layer dry, affecting their mobility lead to composite goods decline in brightness and fastness. The third is to save with plastic, if the slow speed will cause the membrane surface layer dry, stream transport decreased, resulting in composite materials of light brightness, fastness down, in order to ensure the quality of the slow speeds, we must increase the plastic volume.

 2, plastic volume: According to the paper, ink, printing process and the impact of factors such as machinery and equipment. Adjust the amount of plastic in order to ensure that the surface of composite materials without Songhua, bright spot flaws and so on, to meet their quality requirements for a suitable plastic composite volume (Note: to determine the appropriateness of the amount of glue is to see the final finished goods, whether the effect of the compound to meet quality requirements, rather than the fancy rubber roller or a rubber membrane volume)

 3, pressure: The amount of a suitable plastic case, the air between the film and paper all the out of, All composite materials and their non-residual bubble gum without being on both sides and paper from the membrane interface at the appropriate pressure extrusion. Plastic volume, pressure has been coordinated, appropriate and best place to observe the finished product is a compound winding roller, rather than on the rubber roller, film, and pressure wrench such a purpose.

Note:

 1, using the glue before the machine rubber roller to be cleaned.

 2, the glue should not mix with other glue to use.

 3, the glue to use the process, not on their own water.

 4, change volume, do not stop for too long, to prevent the rubber coated rollers on dry.

 5, the plastic must be sealed and stored to prevent the crust.