Minimum Order: 0
Quality/Safety Certification: 0.00
Aluminium Foil Duct Tapes,
flame retardant, high quality, promise the most competitive price..
Aluminium Foil Duct Tapes A 40 micron (1.6 mil) dead soft aluminum foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
FEAUTURES
Aluminum backing provides excellent reflection of both heat and light.
High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
Low moisture vapor transmission rate makes Metalflex DL4005 an excellent vapor barrier.
Service Temperature range from -40° to +150°C (-40° to +302°F).
| |
| | PROPERTIES | METRIC | IMPERIAL | TEST METHEOD | | Foil Backing | 40 Micron | 1.6Mil |
PSTC-33 | | Total Thickness | 80 Micron | 3.2Mil | PSTC-33 | | Peel Adhesion to Stainless steel | 25N/mm | 90Oz/In | PSTC-1 | | Peel Adhesion to Aluminum foil | 25N/mm |
90Oz/In | PSTC-1 | | Rolling Tack(11mm ball) | 20cm | 8 Inch | PSTC-6 | | Holding Power | 5000+ min | 5000+ min | PSTC-7 | | Service Temperature | -20~+80 | -4~176 | ---------- |
| TYPICAL APPLICATIONS
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1200m
STORAGE & SHELF LIFE One year when stored at 21(70 ) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the Metalflex product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on Metalflex product between +10 ~ +40°C (+50 ~ +105 ).
|
| | | | | |
|
|
|
