Handheld O2 & CO2 Gas Detector for Greenhouse equipment
1. Can measure the concentration of CO2 and O2 in greenhouse
2. Alarm

Handheld O2 & CO2 Gas Detector for Greenhouse equipment

Brief introduction

PGas-24 Portable 2 in 1 Gas Detector, can continuously measure the concentrations of any two kinds of gas continuously in buildings, offices, laboratories, greenhouse, greenhouses & etc.

 

1) Jack of probe

2) Instruction light of CO2

3) Instruction light of O2

4) Screen

5) Calibration button

6) O2/CO2 swith button

7) Swith

8) Sensor

Note: this figure is based on model PGas-24-O2/CO2

 

Main feature

Able to detect O2,CO2 continuouslyDisplay O2 or CO2 concentration alternating, (5 seconds alternately)Auto self-calibration when power onAcoustooptic alarm when battery exhausted

Technical parameters

 

Parameter	Characteristics
Measuring principle	CO2:solid electrolyte sensor O2,H2S&etc.:electrochemical
Sampling method	Diffusion
Operation enviroment	0~40°C,≤80%RH(no condensation)
Display	Digital display (unit:%)
Power supply	3 dry cell * 4/AC100V (using a dedicated AC adapter)
Battery life term	About 20 hours (when using alkaline batteries)
Size	Monitor:76(W)×27(D)×145(H)mm Detector:28(W)×27(D)×170(H)mm About 250g
Length of probe	100cm

 

Measuring gas(any two gases):

Measuring gas	Range	Accurancy
CO2	0.04-5.00%	±30%rdg
O2-1	5.0%-30.0%	±3%F.S
O2-2	0-30%	±0.7%F.S
H2S	0-100ppm	±5%F.S
CO-1	0-1000ppm	±5%F.S
CO-2	0-2000ppm	±5%F.S
NH3	0-100ppm	±5%F.S
SO2	0-100ppm	±5%F.S
Cl2	0-50ppm	±5%F.S