Portable type air compressor
1.30L/1.5kw/2hp
2.Pressure(bar) 8
3.Pressure(Psi) 116
4.For Household Use Only.
Portable type inflator air compressor
Model | ASL-0930 |
Tank L | 30 |
Tank Gal | 7.9 |
Power(KW) | 1.5 |
Power(HP) | 2 |
Pressure(Bar) | 8 |
Pressure(Psi) | 116 |
displacement(m³/min) | 0.1 |
Voltage(V) | 220 |
Frequency(Hz) | 50 |
Speed(rpm) | 2850 |
Diameter of piston(mm) | 47 |
Journey of piston(mm) | 38 |
Packing size(mm) | 565×240×570 |
G.W/N.W(kgs) | 21/20 |
20'GP/PCS | 336 |
40'GP/PCS | 672 |
40'HQ/PCS | 840 |
MAINTENANCE:
When performing any maintenance or service:
. The air compressor must be turned off.
. Disconnect compressor from the power source.
. Drain tanks.
. Allow compressor to cool down.
MAINTENANCE CHECK LIST:
Daily:
Check oil level.
Drain accumulated liquid from tanks.
Check for oil leaks.
Check for unusual noise and/or vibrations
Check that all fasteners are secure.
Weekly:
Check safety relief valve.
Inspect and clean air filter.
Clean breather holes on oil check dipstick.
Monthly:
Check for air leaks. Apply a solution of soapy water around joints. Look for air bubbles around joints when compressor reaches the pressure cut-out limit and pump turns off.
SIX MONTHS OR 250 OPERATING HOURS:
Change compressor oil. Use only SAE 20 or SAE 30 weight non-detergent oil.
Replace oil more frequently when used in dusty operating environments.
OIL CHANGE:
1. Place oil drain pan below oil drain plug.
2. Remove dipstick to allow air to enter crankcase.
3. Remove oil drain plug.
4. Allow oil to drain completely.
5. Clean and replace oil drain plug.
6. Refill crankcase with SAE 20 or SAE 30 weight non-detergent oil to red dot on oil level sight glass. Be careful not to overfill.