Welcome to B2BAGE
CNG compressor DF-0.3/(2-4)-210
CNG compressor DF-0.3/(2-4)-210

Minimum Order: 0
Quality/Safety Certification: 0.00


cng compressor
1) Model: DF-0.3/(2-4)-210
2) Type: D-shape symmetrical balancing reciprocating piston type, four

cng compressor

 

DF-0.3/(2-4)-210 Type Natural Gas Compressor

1. Main Specifications

DF-0.5/(2-4)-210 type natural gas compressor adopts D-shape symmetrical balancing reciprocating piston type. It is of air cooling, four-stage compression, stage 1 and 2of the shaft with single action, and stage 3 and 4 of cover with single action, packing of piston rod, and tight structure. The compressor features in the little power consumption, low noise, small vibration, high reliability, and easy operation, etc.

The compressor mainly consists in the compressor, motor, belt transmission system, air system, buffering separator between stages, cooling system, safety protection, skid mount package, metal protection case, operation gauge system, appliance device, etc.

1) Model: DF-0.5/(2-4)-210

2) Type: D-shape symmetrical balancing reciprocating piston type, four stage compression.

3) Compressed Medium: Natural Gas   

4) Stage: 4

5) Cylinder’s No.: 4(φ135/φ85/φ45/φ26) 

6) Cooling Mode;air cooling        

7) Piston Stroke: 80 mm

8) Compressor’s Rotation Speed: 670r/min

9) Power of Compressor’s shaft: 29.5 kW

10) Suction Pressure: 0.2~0.4 MPa

11) Rated Discharging Pressure: 21.0 MPa

12) Suction Temperature: ≤40°C

13) Discharging Temperature: ≤180°C

14) Nominal Flow Rate: 0.5 m3/min(100Nm3/h)

   When the suction pressure is 0.2 MPa, the flow rate is 90Nm3/h;

When the suction pressure is 0.24 MPa, the flow rate is 100Nm3/h;

When the suction pressure is 0.3 MPa, the flow rate is 120Nm3/h;

When the suction pressure is 0.4 MPa, the flow rate is 150Nm3/h;

15) Lubrication Mode;curve-shaft, link-rod and cylinder;spray lubrication 

Packing and cylinder: little oil lubrication

16) Gas Transmission Temperature: ≤55°C

17) Noise Level: ≤85dB(A)

18) Transmission Mode: V-belt transmission

19 ) Weight: ~3500kg

20) Dimension(L×W×H)~ 2400×2000×2200(mm)

2. Motor’s Specifications

Main motor’s type: YB-225S-4 

Power;37kW 

Voltage/phase/frequency;440V/3PH/60HZ

Explosion-proof level: ExdIIBT4

Protection level: IP54

Insulation level; F

3. Automatic Control

1)    The compressor adopts self-coupling pressure lowering start which is      controlled by relay.

2)    If the discharging pressure of last stage is higher than the set-up value, the compressor   stops and warns.

3)    If the oil pressure is lower than the set-up value, the compressor stops and warns.

4)    If the motor is overload, short of phase, it stops and warns.

4. Supplying Arrange

Compressor, explosion-proof motor, cooling device for stage 1 to stage 4, the safety valves for suction and stage 1 to stage 4, explosion-proof control case, controlling components, gauge, gas system, transmission system, metal protection case and skip-mount frame, non explosion-proof starting control case, spareparts, documents.

5. Compressor’s Installation

The compressor is fixed by general frame. All the parts of the compressor are installed on the same bottom frame which makes the delivery easier. The compressor need to installing on the flat cement ground. If the condition can not meet the request, the user needs to adopt the suitable method.

   The appliance control case should be installed at the non explosion-proof area.

The compressor’s layout

 

Compressor’s structure

 

The whole machine’s layout (not including the metal case)

7. Quotation and Delivery Time

Price : FOB China USD38800;The price is valid within 30days.

Delivery time: 75 days after receiving the down payment. 

                                    

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.