1)Modulating Damper Actuator
2)CA/CD Series
3)DC 010VDC2~10V
4)Top quality
5)Competitive price
CA/CD Series Modulating Damper Actuator
1.Output Torque: 5Nm, 10Nm, 20Nm
2.Running Time: 150s
3.Voltage: 24VAC or 110 - 220VAC
General
CA/CD Series Modulating Damper Actuator is widely used to control damper system, the angel travela and motorized ball valve in HVAC system.
Control Signal: DC 010VDC2~10V,420mAfeedback signal, on/off
Different Torque: 5, 10, 20, 40Nm.
Specification
MODEL
CA/CD
TORQUE
≥2Nm
OPERATION TIME (50Hz, 90°)
≈108s
POWER SUPPLY
24Vac±10; 4VA
CONTROL SIGNAL
0-10Vdc; 2-10Vdc; 0-20mA dc or 4-20mA dc
CABLE
0.5~1.5mm2
ROTATE ANGLE
90º ≤Mechanical limitation ≤ 95º
NOISE LEVEL
Maximum 45dB(A)
POSITION INDICATION
0~10Vdc position feedback signal output
IP CLASS
IP 54
AMBIENT TEMP.
-5 ~ +50
STORAGE TEMP.
-30 ~ +70
USEFUL LIFE
>60000 cycles
Easy Installation:
*Fix the actuator to the damper shaft by universal grip. Various fixing support of special actuator(refer to the photo of the standard configeration of installation support) will be supplied according to the customers' requirements. By adjusting the pot, the rotation angle of the actuator can be adjusted. And the matching of working range and feedback signal will be completed automatically.
*convinient function checking:
The testing for the function of damper operation is convinient as well: By pressing the manual button of the actuator, the actuator will escape from the gearing. User can operate the damper manually by pressing the manual button without releasing. Operation without power is forbidden.
*Good and reliable performance
With the function of overload protecting, actuator adopts dual-rotation Hysteris Synchronous Motor. Unnecessary with limitation switch, the acutaor will stop by clutching the actuator when running to the end. The actuator has the mechanical limitation position of adjustable precision, timing protection function for circuit and deadlocking status protecting function.
* Great expansibility
Various control signal and feedback signal is acceptable and user can do programmation according to the detailed requirements with code-dialling program table.
