with a pair of Quadruple Synchronized Beams sensor (four beams)
used for buildings, yards,schools,pools, etc
The simple method of setting the system up from new is as follows:
1) Insert a Telephoneline or a Valid Sim Card. 2) Wall Mount the Alarm System.
3) Plug in the AC/DC adapter to AC power socket
4) Turn the On/Off switch on of the power supply for control panel.
5) Program the system using the built in keypad (not need to press, just touch).
6) In the program menu, choose the zone name, type, group name, then touch learn (study) button on the rear of the detectros until a "success" appear on the LCD.
7) Repeat operation 6 & 7 for each detector to make sure they are programmed.
8) Test by setting the alarm and activating before put into use.
0. Slim elegant design Alarm Panel with smart intelligent Touchpad, support PSTN (Lanline) and GSM (Cellular Technology).
1. Powerful Alarm System include interior Wireless PIR Motion Detector, Wireless Door/Window Magnetic Contact, exterior Wireless/Wired Active Infrared Beam Detector for protecting your inside and outside area.
2. 29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes or wireless keypads per zone)
3. 8 more wired zones (Each zone supports 1 wired sensor)
4. Can dial up to 5 phone numbers in sequence, 5 SMS mobilephone numbers.
5. Call and SMS both are compatiable with ADEMCO Contact ID.
6. Arm\ Disarm the system by:Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely by phones.
7. Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast "bi bi bi")
8. Support wireless "ding-dong" doorbell function (need to buy extra doorbell from us)
9. Non-volatile chip, information stored automatically when off power
10. Record up to a 10 second voice message, When alarm is triggered, it will automatically auto play the voice message over the phone.
11. Alarm Sounds if Phone Line is Cut
12. Remembers programming settings when power is disconnected
13. Available in both AC\DC with Low-voltage Indicators.
14. Learn sensors to alarm host panel, very easy operation.
15. Supports Door. Window. Motion. Smoke. Heat. Glass Break. Gas Leak. Carbon Monoxide Detector. etc.
16. Support ADEMCO Contact ID, can connect to CMS (Central Monitoring Station).
Perimeter Alarm System Technical Information:Working voltage:100~240VACOperating power: 9-15VDCGSM Frequency:850/900/1800/1900MHZWireless Frequency:433MHZ / 868MHZStatic current: ≤ 80mAAlarm current: ≤ 500mAGSM Cellular Transmission Power: 2WOperating environment: Temperature: -10°C-50°C; Humidity:≤90%Maximum available quantity of keychain (remote controllers) : 4 PCSMaximum available quantity of wireless sensors: 116 PCSDimension:180*120*50(mm)Infrared Beam Specification:
Model | VSH-50 | VSH-100 | VSH-150 | VSH-200 | VSH-250 | |
Warning Distance | (Outdoor) | 50m | 100m | 150m | 200m | 250m |
(Indoor) | 150m | 300m | 450m | 600m | 750m | |
Maximum Distance | 700m | 1400m | 2100m | 2800m | 3500m | |
Beam | 4beams | |||||
Detection Method | 4beams interrupted at the same time | |||||
Light Source | Digital Filter Type | |||||
Sensor Speed | 35~700msec Adjustable | |||||
Warning Output | Relay OutputContact Rating: ACDC30V 0.5Amax | |||||
Power Supply | DC13.8~24V | |||||
Current Sinking | 95mA | 100mA | 100mA | 100mA | 105mA | |
Using Temperature | -25°C~+55°C | |||||
Dismantle Prevention Output | Relay OutputContact Rating: ACDC30V 0.5Amax | |||||
Adjusting Angle of Optical Axis (Horizontal) | 180°(±90°) | |||||
Adjusting Angle of Optical Axis (Vertical) | 24°(±10° ) | |||||
Hairline Pointer | Window type | |||||
Connection | M3Connection Assistance, Spiral Terminal | |||||
Dedew and Defrost Method | Heating type cover (made to order) | |||||
Other Function | Induction Testing Output Terminal | |||||
Material | Resin | |||||
Weight | 970g(Light Acceptor +Light Projector) |