PYROFLEX infrared detector and advanced HighBar intruder detection work together to provide consistent detection sensitivity throughout the monitored area, over the full range of intruder motion speeds.

Wide operating temperature (-40°C to + 55°C)

Microcontroller temperature analysis for summertime detection in human-temperature background; temperature sensor in optical chamber for best background temperature measurement

Sensitive tamper detection switch

Precise factory calibration for dependable performance of every sensor

World-class immunity to RF interference

Look-down detection directly below the sensor to catch wall-creeping intruders

Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust

Selectable processing sensitivity for different environmental requirements

High False Alarm Immunity

High False Alarm Immunity
HighBar? waveform processing rejects noise! After signal filtering, real pulses are separated
from noise by length of time. In the next stage, alternating polarity (+/-) pulses are required to qualify for an alarm -- better than many simple
ASIC-based sensors.

PYROFLEX IR Detector The False Signal Smasher

10x 100x more signal than conventional detectors

Less amplification needed in sensor

10x 100x less amplification for false alarm signals

High immunity to RF, shock, temperature changes, white light, electrical surges

Three-Stage White Light Protection

 White diffusing lens

 Light Sponge? white light absorber

Large IR detector window (4 mm x 5 mm) to allow element setback in detector case

SureSpot  microcontroller waveform processing is on the watch! Where the complex curves and dips of real signals fool other sensors ASICs and simple processing, SureSpot? processing detects intruders!

The added signal strength provided by PYROFLEX  detector allows superb summertime detection in near-human temperature environments.

 Easy Installation

45-degree terminal block for easy wiring

10-minute zone finder mode

Deep wire channels and dual cable entry

45-degree corner-mounting surfaces

Knock-out holes for mounting and wiring
Swivel-mount accessory interface