Extremely high sensitivity
Convenient to use
detect hidden metals precisely
automatically calculate times of alarming
JD-001 is a type of newly designed shoe metal detector with an exetremely high sensitivity which is able to detect any hidden metals in shoes. In many occasions, though those Walk-Through Metal-Detect Gates can detect most parts of human body, it is possible for them to meet with a detect failure when someone tries to hide metals in their shoes. However, there is no need to worry about it any longer because JD-001 perfectly makes up for it. JD-001 can be widely used in entrance of airports, railway stations, government agencies, jails, big stadiums etc to ensure security and it can also be used in some specific manufactures like jewellery or golden articles to avoid being stolen.
Characteristics:
1. Very Convenient to use;
2. Extremely high sensitivity;
3. Dual alarming system: When metals are detected, JD-001 will beep and red LED indicating light will give flash.
4. JD-001 can detect those hidden metals precisely. Red LED indicating light will show which shoe contains hidden metals.Indicators.
5. Low power consumption
6. JD-001 will automatically calculate times of alarming. Even though the power is off. The data wont lost until you reset it.
Parameter:
1. Size: 500(L) * 350(W) * 100(H) mm, the height of bulge is 80mm
2. Weight: 7.3kgs
3. Working power: 12v
4. Power: Ready to work: 0.96W, Alarming: 2.65W
5. Current: Ready to work: 80mA, Alarming: 220mA
6. Alert mode: sound and light Dual Indicators
7. Working frequency: 650KHz
8. Working temperature: 20~~+55
9. Working humidity: 5%~~95%
10. Weight load: 150kgs
Main Usage:
Usually it is very inconvenient for passengers or customers to take off shoes to be checked while JD-001 will solve this problem. Especially used with Walk-Through Metal-Detect Gates, the efficiency and safety of security check will be enhanced greatly.
Type & Used Place
1. Passenger security: airports, railway stations, big stadiums, big exhibitions,customs;
2. Public Security, Court, jail system
3. Government agencies, Consulate
4. Celebrating activities
5. Recreation places, pub, KTV, etc.
6. Factory, noble metal factory, jewellery shop
7. Education system
Users instruction:
1. On/Off: Press the On/Off button on the face of the detector and the green LED light will on.
2. Detection: when JD-001 detect metals those LED lights will turn red and the detector will beep. How many numbers of lights will turn on depend on how much and what kind of metals are detected.
3. Reset: The reset button is on the right side of the detector. When the detector beep continuously(it means sensitivity is too high or low voltage), please press the reset button.
4. Charge: there is charge jack on the left side which can be used as DC power supply or charge.
5. Sensitivity: 2 sensitivity adjusters on the footwall of the detector. Clockwise to increase and anticlockwise to decrease the sensitivity. The highest sensitivity: turn the adjuster(Clockwise) until it alarms, then turn anticlockwise until the tone fades.
6. Charge time: 6 to 9 hours. (4400mAh 3.7v Li battery)
