Axial wheel water generator
This type is high water head type, high generator efficiency, very good for family and small facto

water generator

This type is low water head type, high generator efficiency, very good for family and small factory. Now we have 600w,1000w,1500w,2000w---------5kw ect.

Installation:

1.External pipe diameter of 150mm or so well chosen, and the water is best not to turn in the installation.

2.It should be designed with drain grating to protect from stone ,branch, weed to block the gap. And the water wont go into installation.

3. it should have a pond before the water inlet, the volume is about 2-5m3 when the water is enough.

4.if the machine is not used for one month or more. The electric motor and the cover should be inspected . The electric should be used after it is dried when the insulating resistance is less than 0.5 teraohm.

Note:

1.bearing to butter , inspecting the water seal, Changing it immediately if it is broken.

2.Power generation is not the first time open to the maximum, with the power increase, and slowly increase the valve switch, the motor has power generation, using the voltage can not be too high, power should be stable, not varying, the use of electrical appliances to stabilize re-use 220 volts, 2000 watt generator also uses the following bulb for mediation, more open high voltage, low voltage when the open a little less, not more than two hours to shut down.

3.safety utilization of electric power, Power enclosure must be installed on ground, the engine room to have danger signs.