Saw Cutting :

Fretsaw : ladder-Type/plate saw plate saw teeth are inclined at 45°.

Diameter of saw plate :300MM .

Teeth number : 72 teeth type is usd to cut 5 sheet .Leuco Ref :188389

96 Teeth type is used to cut gross edge .Leuco Ref :188390

Diameter of saw plate :250MM .

Teeth number :60teeth type is used to cut 5 sheets leuco Ref :188939

80 Teeth type is used to cut gross edge . Leuco Ref :188940

Thickness of teeth :3.2MM

Relief angle :15°

Rake angle :+10°

V Type Open-tank process :

If the back side of aluminium composite panel needs to processed as a V type tank , it is easily formed by using general router .Cutting speed :3000-5000M/Min ,Feeding speed :25-30M/Min

U type open-tank process :

Cutting machine with guide plate can be adopted to opening tank .After the V type tank of aluminium composite panel finished , it will be very convenient to use .

Riveting :

Users can use some common equipment to rivet and fasten aluminium composite panel . If ACP is used outdoor , heat seal should be taken into consideration . Self-plugging rivet can connect it only from one dirction .

Bending :

If the aluminium composite panel is processed on the operation platform, the bending part can be made orderly . Flat punch , press brake and bending mould are suitable for bending .We recommend the bending temperature higher than 10°C

Bolting :

Considered from deformation limit , formula e≥2D is the best calculation method about the distance between D and e .

Use press brake to process aluminium composite panel

If users adopt press brake to process aluminium composite panel , the calculation formula of Min . Inside radius is: R=15*t (t means the thickness of sheet )

If aluminium composite panel is processed by three roller plate bender :

Compared with press brake , three rollers plate bender is suitable for bending of larger inner diameter .

Drilling :

It is easy to drill holes on ACP . We recommend drilling machines specially designed for drilling holes on the aluminium and plastic materials . By the way , the drilling machine should have the function of orientational drilling , if it is used to drill a bigger hole . Cutting angle : 100°-400°, helical angle : 30°-50°,cutting speed :50-300M/Min ,Feeding speed :0.02-0.5MM/rotate ,speed drill size : width of screw thread +2MM .