Power supply: AC220V
voltage fluctuation scope: -15/+10%
frequency 50HZ
Power: 18VA+25VA

244 automatic burner controller can be directly used to turn on and detect the burner running. Ionized flame detection or UV detection can be adopted, or the operation mode canbe that both ignition and detection functions are combined into one electrode or two of the electrode separate control. Control burner with combustion air or atmospheric burner. Ignition power of the gas burner should be less than 450KW, otherwise, an external high power ignition transformer must be equipped; It enjoys local switching and remote button resetting two modes. The controller application with reference to the European Standard EN-298 design of gas.

Ambient Temperature:-20°C - +65°C without condensation.

An independent detection cable is used and in the protection of plastic cable pipe, shall be separated from the main cable, to prevent electromagnetic interference.  The live wire and zero line shall not be connected error, and the electric cabinet earth wire must be connected to the earth wire of the burner and the controller 244.

Power supply: AC220V, voltage fluctuation scope: -15/+10%, frequency 50HZ, no floating voltage being with the zero line(other power supply models can be customized). Power: 18VA+25VA (ignition power 25VA).

Built-in ignition transformer, with ignition electrode clearance being 2~3mm and ignition high-voltage line <1 m. The high-voltage line shall not pass through metal pipe and shall separate from the detection line.

Installation sizes:35mm U-shaped rail can be used, width113mm, height 75mm and depth 120mm. Distance between two install ation holes on the base plate is 70mm. Fuse: 3.15A delay type H.

 Detecting mode: both ignition and detection functions are combined into one electrode or two of the electrode separated control.