PU automobile anacoustic cushion foaming line
Detailed Product Description
PU automobile anacoustic cushion foaming line
the foaming line is special designed forautomobile anacoustic cushion foaming. It consists of 1 sethigh-pressure foaming machine and 1 set MH200/150 PU Foaming MouldingMachine.
All the ordinal operation for foamingproduction (to open the mold, close the mold, lock the mold, drive themold-plate up/down, clamping the parts, to do edge-breaking of theparts) is hydraulic/pneumatic driven and by PLC control.
Main Technical Parameter
* Type: HPM50/20;
* Suitable foaming system: flexible foam, integral skin foam,
* Suitable material viscosity 22 degree Centigrade:
Polyol: max. 3000 mPa.s,
Isocyanate: max. 1000 mPa.s
* The flow capacity ranges: 100950g/s,
* Mixing ratio range adjustable ~ 2-2.5:1,
* Pouring programming time: 0.50~99.99sec
* Mold installation board area: 2000×1450mm;
* Mold installation space height: 830mm;
* Movable mold-plate stroke: 100 mm;
* Mold-open angle:~30°
* Hydraulic working pressure: 8~ 12MPa;
* Control voltage: AC 110V/DC24V