UL listed Emergency ballast
1. Min. 90 minutes operation.
2. 5 years life time.
3. Switching cycles for module: 20,000times.
UL Emergency ballast
1. For emergency operation of Fluorescent lamps. For normal operation must be used a separate AC ballast. See instruction manual for further details
2. Start up time of normal operation is max. 5 seconds, also at low battery level. Start up time of emergency operation is max. 0.5 seconds
3. A LED signal lamp is lit when the module is in normal operation and is switched off when the lamp is in emergency operation
4. At normal surrounding temperature (from 0 Cº to 40 Cº), the charging time of the battery pack from 0%- to 100% is max. 24 hours. The discharging time is min.90 minutes
5. Emergency operate one lamp minimum 90 minutes at reduced light output
6. Battery pack is integrated with the emergency module.
7. Installation according to the instruction manual
| Mains supply | 120V or 277V, 50/60Hz |
| Tolerance of mains supply | 108-132V or 250V-305V |
| Input Wattage | 2.5W |
| Max. Input current | 0.12A |
| Max. Charging current | 110mA |
| Battery Rating | 1.8Ah,4.8V (1.2V x 4PCS) Nicd battery SC type, 8.6WH |
| Initial Lumen Output | 500LM |
| Ballast Lumen factor | 17/18W: approx.18%, 32/36W: approx. 15% |
| Lamps operated | Most 2'-4' single, bipin T8 & T12, compact, HO or VHO fluorescent lamps |
| Emergency operation | min. 90 minutes. |
| Charging cycles* | mins. 500 |
| Life time for battery pack | 5 years |
| Operation time for module* | 30,000 hours |
| Switching cycles for module* | 20,000 times |
| Life time of module* | 5 years |
| Compliant standards | UL 924 |
| Approval | UL Listed by UL USA. |
| Mounting Measurement: | L242(230) * H27 * W52 mm |
| * At normal surrounding temperatures (from 0 Cº to 40 Cº) |
