1. Thickness(mm):2.5/ 3 /4
2. Base steel Q235
3.Fine hot dip galvanized or sprayed
4. Customer's requirements are available
1.
Description: The galvanized products after processing and forming, with hot dip galvanizing inside and outside the surface layer, to combine it with a solid base and long-term stability.
Galvanized material:Zinc
Galvanizing thickness:average 85um, no less than 61um
Appearance:Complete, and color conformity, smooth surface, no lumps and other defects
Impact test:Zinc layer does not peel, not raised, no cracking
Bending:No cracks, no spalling
Uniformity of zinc coating:5 etched copper sulfate, Unchanged red
Salt spray: Non-corrosive
2.
The products are heavy-duty electric spray treatment, the internal coating for hot dip galvanized steel, the surface coating is to use an all polyester powder coating, electrostatic spraying method using it firmly with the substrate to form one.
Coating Material:Polyester
Coating thickness:more than or equal 76um
Appearance:uniform, smooth, connected lubrication, the same color.
Pinhole:1500V no spark
Adhesion:cut test, the coating without stripping off.
Impact:no peeling and no cracking.
Chemical Reagents:free from guns, no softening, no loss of adhesion.
High and low temperature:no wrinkles, no swelling, no loss
Accelerated Weathering:No big change color, no cracks, no damage
Salt spray:no blistering, no peeling, no rust