Solar cell module tester
1.Automatic temperature
2.Windows operation surface
3.Humanized-design testing software
Solar cell module tester
Applications:
Apply to the test and result record of mono-Si or poly-Si solar cell pieces.
Technology characters:
A grade spectrum;
A grade unevenness degree of irradiance;
A grade instability of irradiance;
Pneumatic and buffering contact, front probe contact, back contact;
Four-line survey;
10 parameters display;
8,000 data collecting dots;
Irradiance automatically compensating;
Temperature automatically compensating;
Measurement parameter displays in tabulation and graphic way;
Voice counts off and prompts;
Counting prompt of flash times;
24hrs continuous working;
Working life of imported Xenon lamp is 300, 000 times of flash
Technical parameters:
Model | GTC-3A | GTC-B |
Lamp Spectrum | In line with iec60904-9 spectral Irradiance distribution requirement(AM1.5) | |
Light intensity | 100mW/cm2 (continuous adjustable range 20-120W/cm2) | |
Light intensity non-uniformity | ±2% A grade | ±3% |
Instability degree of irradiation | ≤±2% A grade | ±2% |
Test result consistency | ±0.5% | ±1% |
Test error of electrical properties | ≤2% | |
Single flash time | 10ms | |
Effective Test range | 200x200mm | |
Measuring voltage | 0~0.8V(resolution 1mV) | |
Measuring current | 0~20A(resolution 1mA) | |
Test Parameters | 1sc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, Rsh |
Options and customization:
To reach the test requiements of double grid lines, three grid lines and 0 grid line.