W43-4*1500leveling machine
1 certification CE ISO9000
2 high precision for level
3 high productivity
4 easy operation
This machine is of sheet metal the cold leveling equipment, but with all kinds of plank, strip steel processing equipment and supporting the use of production line, also can use single. The work principle make steel roller in school work roll repeatedly between flat deformation, eliminate stress to the purpose of the leveling. Mainly used in metallurgy, vehicles, metal structure, ship, pressure vessel, container, chemical machinery and other manufacturing and metal material storage, plank distribution, etc.
Leveling conveying rate of basic parameters
The thick plate: 1-4 mm
Leveling width: 1500 mm
Leveling roller: 11 root
Leveling roller diameter: 110 mm
Leveling speed: 0 to 12 m/min
Leveling roughness: more than ± 1 mm/m ^ 2 (convex folds tensile, sheet metal have deformation on the original defect, maybe can't ensure leveling roughness)
Applicable material: Q235 (other materials according to the strength conversion)
The main motor power: 11 KW
Leveling machine main structure
The machine is W43-4 x 1500 standard of roller of sheet metal leveling machine. By the power and host of two parts.
Power leveling in part by the power seats, reducer, coupling and other components, the main motor with high power motors.
The host of the roller structure, the welding type base, and the overall dragon type rack, 11 root leveling the roller (five to six), and the upper and lower, roller seat, beam, roller, roller seat, worm gear and worm drive the top roller ascension pressure equipment etc.
Among them the top roller of reduction to use the worm gear and worm transmission mechanism is adjusted respectively, can adjust each root leveling roller and the clearance between the bottom rollers. Users can need according to the big import gap, and the small export clearance to improve leveling precision. For more difficult to the whole flat plate, also can enter, export clearance up, shun, inverse direction motor, and rolling.
Leveling roller materials for 60 Cr. Leveling work roll adjusting quality and intermediate frequency quenching after finishing grinding. Leveling work roll hardness HRC45-55, quenching depth 2-3 mm. To ensure that no work roll radial and axial string of dynamic phenomenon, roll the collar with double row of heavy needle bearings and unidirectional thrust ball bearings, small resistance movement.
This production line with 380 V, 50 Hz ac ac power, environmental temperature:-5-40 degrees Celsius, the relative 80% (no condensation). The electrical work station centralized control, main control elements are chosen "Siemens" products.
Leveling machine operation guidelines
Turned on, the abrupt stop after open to choose the positive &negative, in operation shall not choose positive &negative, want to stop;
Boot, must first open fan, and then starting host. When stop by host first stop, then shut fan. If the sequence is wrong damage the possibility of electrical appliances.
Leveling machine maintenance
This product after commissioning can use later, the user must understand the machine maintenance. Basically has the following several aspects:
Anyone with a yellow nozzle place, a month plus one times. Is mainly to the bearing the lubrication;
Pay attention to roll the clean, do not allow a welding slag, short sheet metal or other things fall into the between rolls, lest damage leveling roller;
After long after use, to check if there is loose screw nut, with a wrench tightly;
If meet professional problem, must ask professional processing or inquiry.
Leveling machine security matters
Users in the use of the machine should establish the safety consciousness, pay attention to safety! Mainly in the following aspects:
All rotating parts can't close to contact! Send sheet into the leveling machine, not too close from personal roller, such as clothes, hand, etc. Such as the leveling machine speed rise suddenly, must not forcibly occupy the sheet metal, lest the inertial force involved in machines;
Anyone check maintenance or come on in, the machine must ensure that all cut off. Boot, also want to pay attention to whether someone too close to the machine;
The operating personnel in the operation panel operation needs and send personnel to coordinate the sheet metal. If appear coasters phenomenon, immediately turn off the power.
Remarks: Description and specifications given in this catalogue are subject to modification without notice. We can provide any models not only as shown in last catalogue. Please feel free to contact me via skype cherry zhang1485, or enquiry me, I will reply you within 24 hours, thanks.
