1.Anti Creep Setting
2.Adjustment For Material Thickness
3.Hydraulically
4.13 individual segmented clamps
5Automatic control

metal sheet cutting bending machine metal sheet bending macahine part press break/ bending machinery Specifections

Item	Model	WS4X2500	WS5X2000	WS4X3100
Floding length  mm		1000	1000	1000
Floding  thickness  mm		0.5-4.5	0.5-5	0.5-5
Model Size	L   mm	3500	3100	3600
	W  mm	1000	1000	1000
	H  mm	1500	2000	1500
Weight  kg		4000	3000	3600
Main motor kw		5.5	5.5	5.5

4mm x 2450mm (8ft) ( Also available 3metres x 4mm mild steel)Hydraulic Clamp and unclamp from foot switch. Final Clamping is limited to 10mm increments for safetyFingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy. 24 Volt to foot switch. Overload protectedClamping provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.Unclamp is controlled, to allow the operator to regulate the open height.Apron bed is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal controlSafety trap bar on apron Motor 7.5KwLength – 3.5 metresWidth – 1 metreHeight – 1.5 metresWeight – 4ton

 

Structural & Operating Features 

ü  Hydraulically operated bending and clamping beam for efficient heavy duty operation

ü  High structural rigidity from heavy plate steel box construction with continuous welded seams

ü  Bending beam powered by dual hydraulic cylinders.

ü  Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.

ü  Powerful hydraulic pump provides rapid operation with timer for bend angle

ü  High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp     bearings

ü  Precise electric/hydraulic controls with manual inching of bending beam

ü  Comprehensive equipment protection from electric and hydraulic overload systems