Chemical anchor
Use in level and top hole;
Have enough pull in wet environment;
Drill small hole, without expansion pressure
Chemical anchor
The chemical anchor bolt system is a two-component, anchor bolt, the adhesive contained within a glass capsule. The capsule is placed in the hole and the resin and initiator components are combined when the rod or rebar is driven to the bottom of the hole through the capsule. It can be widely used for bolt anchoring projects, marble no dropping, proscenia wall install, bracket,
baluster, billboard, navigation, the planet receiver, elevator, steel structure workshop, etc
[ Properties ]
· Short curing time
· Use in level and top hole;
· Have enough pull in wet environment
· Negative temperature construction, can provide enough resistance to pull
· Drill small hole, without expansion pressure after instal
Notes
· Thorough cleaning before use holes
· Before anchor curing,prohibit touch bolt
· Storage at 25 degrees below,dark save
· Storage period of 24 months
Common Specifications and Anchor parameters
Type | Screw Type | Suitable drill | Suitable | Suitable anchor | Anti-pull | Anti-cut |
(mm*mm) | depth(mm) | Load(KN) | bolt | (KN) | (KN) | |
SHJ-8 | M8*110 | 10*80 | 7.4 | M8 | >19 | >12 |
SHJ-10 | M10*130 | 12*90 | 10.9 | M10 | >28 | >18 |
SHJ-12 | M12*160 | 14*110 | 16.2 | M12 | >27 | >28 |
SHJ-14 | M14*175 | 16*120 | 20.2 | M14 | >58 | >36 |
SHJ-16 | M16*190 | 18*125 | 21.3 | M16 | >79 | >50 |
SHJ-20 | M20*260 | 24*170 | 40.2 | M20 | >125 | >76 |
SHJ-24 | M24*300 | 28*210 | 52.4 | M24 | >176 | >116 |
SHJ-30 | M30*380 | 35*280 | 86.6 | M30 | >238 | >178 |