split domestic heat pipe solar collector
1) low cost. high return
2)ISO, CE, EN12975 solar keymark.
3)lifetime about 20years.

The  split demestic  heat pipe solar collector is always connected with existing heating supply device, the selective coating on the inner cover of the  vacuum tubes conveerts solar energy into thermal energy and transfers heat to the  heat pipes by aluminum fins. the  liquid in the  heat pipe changes into vapor which rises to the  condenser. the heat then passes through the   heat exchanger and the vapor becomes liquid,. returning to the base of the heat pipe ,  the heat conducts to the heat transfer liquid via a copper pipe. this transference of heat into the liquid creates a continuous circulation as long as the collector is  heated by the sun.

Feature

1)light-weight . easy delivery.

2)attractive design, standard frame suitable for pitched roof or flat roof .

3)can be connected with the existing heating device.

4)Humanized design , no water directly flowing in the tubes, enabling the system still workable in case of occasional tuble breakage.

Heat pipe solar collector description:

1)Heat pipe solar collector for thermal collection with high speed start and super heat collecting and eachanging efficiency.

2the heat pipe material is copper, So it is ok  to transferred to liquid passing through pipes attached to the absorber palte.

3The circulation is closed loop for themal collecting and enchanging start and superior heat collecting.

4 Modularized colletor arbrination with architetural structure adoptable to either slope or flat roof structure, adoptable to either slope or flat roof tructure, almost maintence free system.

The heat pipe Solar collector.

1Model:JHC.

2Vacuum tube:Borosilicate glass 3.3, Diameter 58mm, and leng 1800MM.

3heat pipe:Red copper

4Manifold casing:Aluminium alloy.

5 insulation Layer:Rock wool.

6Frame:Aluminium alloy like Manifold casing.

7 heat transfer fin:Unify aluminium sheet.

8 Working pressure:0.6Mpa or 0.7Mpa

.

Pressurized water tank.

1 Out  tank shell , there are different according to your request, Colored/ enamel/ stailness/fluorine carbon steel can be choice freely.

2inner thank, SUS304-2B stainless steel, thickness about 1.2mm, it keeps the water clean and drinkable and temperature. automatic argon-avc welding  technics ensures on leakage and long lifetime.about 30years.

3Insulation layer, hight density polyurethane , integrated-foaming with twice slaking treatment constanly.

4Presurized water tank with super hydroulic pressure bearing makes your hot water using more comfortable.

5Copper coil inside storge thank exchanges, heat from collectors medium to water very efficiently, one more copper coil installed in the tank top could beconnected with radiator for house heating  it with other heating devices such as gas boiler to assist solar water heating in weather.

The heat pipe solar collector with electrical heater working system.

1 the  integrated system consisting of intelligent  controller circulating  pump flow meter, relief value,expansion vessel, relief value, circulating pump.etc

2automatic operation with intelligent controller, when temperature discrepancy between  collecormesium, and water in storage tank reaches set value, the conteoller shall start the circulation pump autonatically for heat exchage or start auxiliary heating element to assist solar water heating when colder water presents.

other accessories.

1)Electrical heater as on anxilary heating  element i case of the weather raining or snowing days, and the sun hide more than 72hours. So as to ensure a comtinus supply hot water.

2double pipeline pump station.Exterior size:420x280x140mm. Power supply:110v/220v. Collector temp measuring range:-10-200. tank temp measuring range:0-100.

Max presure:1mpa,

Max. flow rate:2.5t/h

Components:safe value, wilo pump ,manometer, flow meter , controller.

3 Anode magnesium Bar,usually hard water in system so as to pretect storage tank and copper coil from water seale effectively.T/p valve stailness bolts and nuts ,anti-aging ,rebber seal, pipe holder make their life as long as other parts of the system .