CAT 3306B LICENSED Engine 160HP,
CAT D6D equivalent crawler bulldozer
Weight without rear ripper 16500kg
3 speeds
BRIEF
Manufactured according of Caterpillar D6D technology and improved new product. 50% parts interchangeable with Caterpillar bulldozer parts.Operator comfort is provided by the two-way adjustable seat, single lever dozer control with adjustable lever and combined hand-lever steering and braking.Sealed and lubricated track greatly reduces internal pin and bushing wear for lower undercarriage maintenance cost.Turbocharged 3306 diesel engine with ind ividual adjustment-free fuel pumps and valves.Easy maintenance with two- piece master link, hydraulic track adjusters, steering clutches and brakes are removable as a unit.Choice of ROPS/FOPS air conditioned tilt cab or open ROPS/FOPS canopy of ripperOperating weight
16.5t
Ground pressure (at operating weight)
54kpa
Track contact length
2990mm
Overall dimensions(L×W×H)
5037×3270×3077mm
Grade ability
Latitude 30 ° Transverse 25°
Ground clearance
445mm
Diesel Engine
Model
Turbocharged 3306 diesel engine
Type
Water-Cooled, single-row, vertical, 4-stroke-cycle
Rated speed
1900rpm
Flywheel power
131kw/160HP
Start mode
24V starter motor
Number of cylinders-bore x stroke
6-121x152mm
Displacement
10.5**
Fuel system
Direct injection with individual adjust system free injection pumps and valve
Transmission
Planetary power shift with high-torque-capacity oil clutched, special valve permits fast speed and direction changes. Three speeds forward, three backward.
Single- stage torque converter with output torque divider combined smoothness with economy. Connected to transmission by double universal joint for removal. Oil-to-air and oil-to-water heat exchangers cool the torque converter oil.
Gear
Forward Speed ( Km/h)
Reverse Speed (Km/h)
1
0-4.0
0-4.8
2
0-6.9
0-8.4
3
0-10.8
0-12.9
Steering & Brake
Reinforced, box-section construction. Out-mounted carrier rollers. Lifetime lubricated rollers and idlers. Adjustable, 2 positions idler.
Number of rollers (each side)
7
Oscillation at front idler
1
Final Drives
Crown-shaven, double-reduction final drives. Floating ring seals. Sprocket with bolt-on. Replaceable rim segments.
Sealed and lubricated track surrounds the track pin with lubricant to greatly reduce internal bushing wear. Lubricant is held in place by a dealing arrangement consisting of a polyurethane seal, a rubber load ring and a thrust ring. Hydraulic track adjusters and two-piece master link standard.
Number of shoes(each side)
39
With of standard shoe
560mm
Track gauge
2667mm
Hydraulic Controls
Four optional systems are available, complete system consists of pump, tank, filters , valves, linkage and control levers anticavitation valve is included with bulldozer controls. System available are as following:
One valve (internal) for bulldozer position: raise, hold, lower, float.
Two valves (both internal) for bulldozer and tilt cylinder tilt cylinder position: tilt lift, tilt right, hold
Two valves (one internal, one external) for bulldozer and ripper, ripper position: raise, lower, hold.
Three valve (two internal, one external) for bulldozer, tilt cylinder and ripper.
Service refill capacities
Fuel tank
295 liters
Cooling system
38 liters
Diesel engine crankcase
27.4 liters
Transmission, bevel gear and steering clutch compartments
98 liters
Final drives (each)
18.9 liters
Specifications For Blades
Blade type
Width
Height
Digging Depth.
Ground clearance
Max. Tilt
Angled
3890mm
910mm
444mm
910mm
330mm
Straight
3200mm
1130mm
472mm
910mm
810mm