Dongfeng bus chassis EQ6890KS1
Minimum Order: 0
Quality/Safety Certification: 0.00
1.Used on passenger buses
2.Dimmensions:841.*2300
3.Max. speed:105km/h
Specification of Bus Chassis EQ6890KS1
| Dimensions(mm) | 8410*2300 | |
| Track(mm) | Front | 1917 |
| Rear | 1800 | |
| Wheel base | 4300 | |
| Front/Rear suspension(mm) | 1740/2500 | |
| Min ground clearance(mm) | rear axle 280 | |
| Ground clearance of upper frame(leaded) | front axle 850 | |
| rear axle 860 | ||
| Dry mass(Kg) | 3800 | |
| Authorized total mass(Kg) | 12000 | |
| Front/rear axle load(Kg) | 4500/7500 | |
| Max.speed(Km/h) | 105 | |
| Min.turning diameter(m) | 18 | |
| Max. grade ability(%) | 30% | |
| Limited mode fuel consumption/100km(L) | 22 | |
| Ramp angle(°) | approach angle 12 | |
| departure angle 10 | ||
| Engine | Model | EQD180-20 |
| Type | 6L, Turbo, inter cooling | |
| Rated power(kw/r/min) | 132/2600 | |
| Max.torque(N.m/r/min | 600/1400~1600 | |
| Gearbox | Model&operation way | 6 gears Gearbox, Flexbile shaft, Gearbox produced by Datong Gearbox Co. |
| Files bit rate ratio | 5.60/30672/2.313/1.487/1.000/0.790/6.366® | |
| Front axle pattern | Fist type&l axle | |
| Rear axle | Pattern | Casting ear axle case, one grade differential |
| Differential ratio | 5.286 | |
| Frame | Same cross section beam | |
| Cluth | Diaphragm | |
| Steering gear | Power steering wheel | |
| Suspension system | Non-independent, Multiple spring | |
| Braking system | Double route brake, drum brake | |
| Braking system | Spring brake | |
| Tire specification | 8.25R20,25-30 | |
| Alternator | 70A, 110A, 150A | |
| Note | Front diesel engine(long front suspension) | |
