Bushing for Rod
1) steel backing, sintered porous bronze, PTFE layer
2) oil less,self-lubricating
3) low wear,low friction
Bearing Bushing for Rod application.
With a steeel body, bronze liner and PTFE/lead overlay, bearing bushings possess excellent wearability and tremendous compressive strength.
Bearing bushing introduction:
1, DU bushing has a common structure, consisting of a steel backing bonded to a porous bronze sinter layer with filled PTFE on its surface.
2, The color of DU bushing's inner layer is black. DU bushing has good wear and friction performance over a range of loads, speeds and temperature conditions.
3, DU bushing also performs well with lubrication. It is applied to the printing, woven, tobacco and gymnastic machinery etc.
Technology Data:
Load capacity | 140N/mm2 |
Temperature | -200oC~+280oC |
Speed limit | 2m/s |
Friction coefficient | 0.08~0.20 |
PV limit (Dry) | 3.8N/mm2 m/s |
PV limit (Oil ) | 60N/mm2 m/s |
Specification:
All sizes are available, please feel free to contact us for details.