1.High tack petrolatum tape
2.Anticorrosion adhesive tape
3.Corrosion protection pipeline tape
4.Cold applied
High Tack PP Fiber Woven Tape
Coating System for pipelines and Waterproofing works against outdoor bad weathers
PP Woven fiber cloth backing supply super stronger tapes.
Pipelines protection for Weld joints, Bends, Fittings, pipe lengths, Pipe rehab and repair, Bare pipe length.
Waterproofing works for
-Waterproofing membrane for basements, substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
Features
-Cold applied.
-High resistance to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodic disbonding
Test Data sheet
Phisical Properties | Test Method | T760 | T780 | |||||
Total Thickness | English |
| 45mils | 50mils | 55mils | 60mils | 65mils | |
| Metric | ASTM D 1000 | 1.15mm | 1.27mm | 1.40mm | 1.50mm | 1.65mm | |
Adhesive Thickness | ASTM D 1000 | 0.85mm | 0.97mm | 1.10mm | 0.90mm | 1.05mm | ||
Backing Thickness | ASTM D 1000 | 0.30+0.05mm | 0.60+0.05mm | |||||
Tensile Strength | ASTM D 1000 | >600 N/cm (342.6 lbs/in) | >800 N/cm (456.8 lbs/in) | |||||
Peel strength to Primed Steel at | ||||||||
At 23 ºC | ASTM D 1000 | >80 N/cm | ( >731 oz/in ) | |||||
At 50 ºC | ASTM D 1000 | >10.5 N/cm | ( >96 oz/in ) | |||||
Adhesion to backing at | ASTM D 1000 | >65 N/cm | ( >594 oz/in ) | |||||
Cathodic Disbondment | ASTM G 8 | 8.0mm | ( 0.315 in radius ) | |||||
Water Absorption Rate | ASTM D 570 | <0.10% | ( <0.10% ) | |||||
Water Vapor Transmission Rate | ASTM F 1249 | <0.15 g/m2·24h | ( <0.01g/100sqin/24h ) | |||||
Insulation Resistance | ASTM D 257 | 2.5×1012 ohm·cm | ( 2.5 by 10E 12 Mohm ) | |||||
Dielectric Strength | ASTM D 149 | 25 KV | ( 25 KV ) | |||||
Impact Resistance | ASTM G 14 | 23 N·m | ( 204 in·lbs ) | |||||
Color | Black | |||||||
Tape width in inches | 50mm(2″),101mm(4″),152mm(6″),228mm(9″),305mm(12″),457mm(18″), 610mm(24″),750mm(29.5″) | |||||||
Tape roll length in feet | 15m(50ft),25m(82ft),30m(98ft),50m(164ft),61m(200ft),100m(328ft),122m(400ft),183m(600ft),244m(800ft) | |||||||
Core size | 38mm(1.5″),76mm(3″) core of paper or hard plastic | |||||||
Application Temperature | -34 ºC to +85 ºC | ( -29 ºF to 185 ºF ) | ||||||
Operating Temperature | +85 ºC | ( 185 ºF ) |