Welcome to B2BAGE
Wireless Test Probe Receptacles R039N for 39mil Spring pin
Wireless Test Probe Receptacles R039N for 39mil Spring pin

Minimum Order: 0
Quality/Safety Certification: 0.00


1.Suitable for test probe
2.Test cables
3.It's wireless receptacles

Wireless Test Probe Receptacles R039N for 39mil Spring pin


Speclifications:

.....

About The Production

1.With the contacting zone is availqable in a large choice of Tips-styles.It must provide the smallest possible contact resistance between the Test probe and test point, to ensure that measurement results are not distorted,most of plungers will be made of BeCu,and as the resistance,B.T.TECH change the way,test probe plunger will be gold plated!!

2.Every kind of Plunger will be used in different situation,as Test probe wireless Receptacles as the picture show.

About Platings

The several components of probes(plungers,barrels and springs) are subjected before assembling to particular galvanic treatments that determine their conductivity,durability,hardness and abrasion resistance features.Herewith we list the main treatments requested and used in our internal galvanic plant:


·HARDGOLD: It has a hardness,depending from its nickel percentage,from 200 to 350 HV.It has excellent chemical properties becoming the suitable treatment to have the best electrical contact.For a better aesthetic aspect(hardgold treatment has a dull colour) it is usually covered by a little layer of pure gold.

·ELECTROPLATED NICKEL:Its hardness is 200-220HV.This treatment treated.

·CHEMICAL NICKEL:It's much harder than electroplated nickel,reaching 600-700HV wit peaks of 850-900HV when then heat treated.Electrical resistance goes from 70 to 100 micon-omega/cm.Usually it is used as first layer for the treatment hardgold+flash gold of plungers.

·RHODIUM:This is a very hard metal(up to more than 1000HV)but its deposit is not always uniform and constant.Tis negatively influence the electrical conductivity in comparison to the better hardgold+flash.

 

About Test Conditions

Ambient Temperature:23°

Relative Humidity:40%

Continuos current flow for 3minutes to reach the current rating,then current at 120% of the current rating for 90 seconds and finally of 150% of the current rating for 60 seconds

 

About Purchase

HOW TO ORDER:

Please contact us directly!!!!!!!

B.T.TECH Cross probe for touching bead pad Spring pin

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.