High strength
Thermal-resistance
Thermal insulation
100% without asbestos
ISO9001;2000

Description

1       High strength:the strongest one among the inorganic thermal insulation materials with the similar density.

2    Thermal-resistance:Non-deformation at the temperature used.

3     Thermal insulation:lower thermal conductivity than other hard mass thermal insulation materials.

4   100% asbestos-free.

New Element TYPE A

Application

It is recommended as thermal insulation in stove,cave dwelling of steel mill,petrochemical,ceramics,glass,cement industries and power industries as well as other various ancillary heating equipment.

Technical data sheet

Density (Dry) Average                                     300 kg/m3

Thermal conductivity(max)                      0.07w/m.k

Average temp.70°C

Flexural Strength                                              0.4Mpa

Compressive Strength                                     0.8Mpa

At 5% deformation

Linear Shrinkage                               Less Than 2 .0% After 24-hr.

                                                               Soaking Period at

1200°F (649°C)

Max. Service Temperature (MELTING POINT)      1000°C

Water content index                        7.5%

PH value                                 8-10

Standard dimension                     1000×500  mm

Thickness                               25-75mm