high temperature calcium silicate
the material mainly use in furnace, kiln, stove, lining of cement, steel & iron
High Temperature Calcium Silicate
1. Product Introduction
This product is made of xonotlite hydrate and reinforced fiber, it features high heat resistance(up to 1100°C), Strong insulation ability, a small bulk density,high specific strength and better durability.It is a rigid material with high compressive strength and low shrinkage at high temperature. Also the material has very low thermal conductivity. The large Blocks and Pipe Coverings can be easily cut and shaped at site with carpenter's tools.
2. Product Performance characteristics
Better durability. It can withstand continuous heat load within the temperature limits
Low thermal conductivity. It has the incomparable insulation performance within the application range
High specific strength. Its specific strength is the highest among the rigid insulation materials
Long service life . It will not produce the powder after long periods of operation as the ceramic fiber felt will
Better application adaptability . It can be Free Cutting by ordinary woodworking tools
Safe and clean. It has not toxic materials such as asbestos sulfur and chlorine
Not afraid of wetted . Its performance will remain unchanged after being dried
3. Product sizes
Pipe cover | Inside diameter | 16-171mm | Thickness | 25-120mm | Length | 600mm |
610mm | ||||||
Plate | Length*Width | 400*250mm | Thickness | 25-140mm | ||
600*400mm | 40-120mm | |||||
600*300/150mm | 30-140mm | |||||
500*500mm | 50-120mm | |||||
1000*500mm | 50-120mm |
Special size can be produced as customer request.
4. Product Physical Performance Indicators
Items | Unit | BRO-20 | BRO-23 | BRO-24 |
Bulk Density | kg/m3 | 200±10% | 230±10% | 240±10% |
Compressive strength | Mpa | ≥0.7 | ≥0.8 | ≥0.7 |
Thermal conductivity | w/m.k | ≤0.057(at70°c) | ≤0.061(at70°c) | ≤0.057(at70°c) |
Use Temperature | °C | 1100 | 1100 | 600 |
Linear shrinkage | % | ≤1.5(1000°C,3hrs) | ≤1.5(1000°C,3hrs) | ≤ 2.0(600°C,3hrs) |
Products with max. service temp. of 850°C are also available here
5. Usage:
Be used as furnace lining, thermal insulations of piping and equipment of electric power, petrifaction, metallurgy industries, also be used in the field of Glass and Enamel, etc.
6. Avantages:
a. Reduced fuel cost due to low thermal conductivity and low thermal capacity.
b.Consistent physio-thermal performance throughout its life.
c. Reduced heat loss due to fewer joints.
d. Longer life of 3 to 4 times the fibrous material due to high strength and resistance to vibrations.
e. Reduced installation cost due to simple fixing.
f. Economical as compared to conventional insulation.
g. Can absorb thermal shocks.
h. Physio-thermal properties remain unaffected after repeated water wetting & subsequent drying.
THANKS FOR READING OUR PRODUCT, IF YOU WANT TO KNOW MORE PRODUCT INFO, PLEASE VISIT OUR WEBSITE : www.thermalinsulation-materials.com
WISH YOU HAVE A GOOD DAY.