Plastic Cap injection machinery/ plastic injection production
1.Max. clamping force:1300KN
2.Max. opening force:400mm
Plastic Cap injection machinery
Detailed Product Description
Features:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container
Ejector force | KN | 31.4 |
Ejector stroke | mm | 100 |
Ejector quantity |
| 5 |
Screw diameter | mm | 40 |
Screw L/D ratio | L/D | 21 |
Theoretical shot volume | cm3 | 226 |
Plasticising weight(PS) | g | 206 |
Injection pressure | Mpa | 180 |
Theoretical injection rate(PS) | g | 143 |
Plasticising capacity(PS) | g/s | 19.7 |
Screw torque | N.m | 740 |
Max. screw rotate speed | r/min | 250 |
Injection stroke | mm | 180 |
Carriage push force | KN | 55.2 |
Pump motor power | KW | 15 |
Pump pressure | Mpa | 16 |
Heating power | KW | 9.2 |
Heating zone |
| 4 |
Dimensions(LXWXH) | m | 4.7×1.25×1.85 |
Net weight | t | 4.3 |
International designation |
| 1300-410 |
