Self-healing shunt capacitor YC106
Low loss, excellent performent and long life.
Small volume, light weight
CNC Low Voltage Self-healing Shunt Power Capacitor YC106
Scope of Application
The product complies with IEC60831-1996 standard.
Place for installation: Indoor
Ambient temperature: -40°C~+45°C
Capacity tdlerance: -5%~+10%
Withstand voltage: Withstanding 700VAC for 2~5s between terminals
and 3000VAC
for 10s between the whole terminals and the outer casing
Loss angle: below 0.12%
Allowable overvoltage:
Below the rated voltage of 110%(Within 8 hours every 24 hours)
Below the rated voltage of 115%(Within 8 minutes every 24 hours)
Below the rated voltage of 120% (Within 5 minutes and less than two time evert month)
Below the rated voltage of 130% (Within 1 minute and less than two time evert month)
Allowable overcuttent: Below the rated voltage of 130%
Insulating impedance: All terminals and the outer casing are above 300MΩ(500 VDCfor one minute)
Internal discharge resistance: The internal protector reduces the voltage to below 75V in three minutes.
Operation instruction
Wall hanging type
According to Fig. 3, fix the auxiliary mounting accessories to the upper part of the capacitor.
Then screw tightly the capacitor in the mounting board.Vertical type
According to Fig.4,fix the auxiliary mounting accessories on the slots of the capacitor
Then screw tightly the capacitor on the mounting board.
Mode of connection
Models | NO minal | Nominal | Capacitance | Size | ||
L | W | H | ||||
0.44-5-3 |
0.44/50Hz | 5 | 82.2 | 167 | 57 | 144 |
0.44-7.5-3 | 7.5 | 123.2 | 280 | 60 | 170 | |
0.4-10-3 | 10 | 164.4 | 280 | 60 | 170 | |
0.44-12.5-3 | 12.5 | 205.5 | 280 | 160 | 170 | |
0.44-15-3 | 15 | 246.6 | 280 | 160 | 170 | |
0.44-20-3 | 20 | 328.8 | 280 | 160 | 190 | |
0.44-25-3 | 25 | 411 | 280 | 160 | 220 | |
0.44-30-3 | 30 | 493.2 | 280 | 160 | 240 | |
0.44-40-3 | 40 | 657.6 | 300 | 120 | 200 | |
0.44-50-3 | 50 | 822 | 300 | 120 | 240 |
Mode of connection
Connecting the wire
Connect the wire to press terminal with M5 drilling hole.(It may be
Connected to the press terminal of 22mm)
Connecting with the capacitor
Correctly fix the capacitor with the strong torque of 35-40kg.com.
Cover
Finally, fix the cover properbly.