1.car body cover 3D carbon fiber film
2.color textured vinyl, clear permanent adhesive
3.PE coating silicon release paper.
car body cover 3D carbon fiber film
Advantage
1.Has a look like real carbon fiber bonnet and hard-top
2.Available in 7 different colors (Part 8: Color chart)
3.Soft stretchable film with strong adhesive, good ability for uneven and arched
surface
4.Easy to stick and remove
5.Outdoor waterproof and Anti-UV ability, can be cleaned by water
6.Applied on most common car paints, plastic and metal surface
Specification:
Vinyl thickness Liner Width Length
150 micron 140g/m2 PE coating paper 1.27 / 1.52m 50m
2. Use area
1.Interior/exterior surfaces of car, truck etc
2.The back of laptop and cell phone
3.Other flat paint, plastic, metal, acrylic board surface
3. Limitation
This type is not recommended for the following applications:
The surfaces of substrates are dirty, solvent cleaned, grease, silicon coating which
affect the adhesion of the glue.
Lacquered or painted surfaces freshly
Great K2 Industry Co., Ltd R & D Center
4. Temperature ranges
Minimum application temperature not less than10°C
Service temperature range - 20°C to~ 75°C
5. Shelf life:
1 year in material's original packaging, storage temperature of 15-22 deg C, relative
humidity of 50~55%.
6. Durability:
2 years life. But it also depends on printing method and ink. Correct substrate
preparation and maintenance of vinyl will enhance durability.
7. Technical data
1.Composition Textured color vinyl
2.Thickness with glue 150 Film micron
3.Shrinkage after application no more tha 1%
4.Adhesive Type Transparent Solvent, pressure sensitive
5.Removable ability Permanent
6.Thickness 0.02±0.003 mm
Adhesive
180 degree Peel (24hr) 560N/m
Type PE coating silicon paper
Weight 140g/m2
Release force
car body cover 3D carbon fiber film
car body cover 3D carbon fiber film
car body cover 3D carbon fiber film
car body cover 3D carbon fiber film
