1:The Function is same with 3M(air release).
2:Meet ROHS(European environmental standards)
3:Range Temperature -15c to 150c.
Product Description
3D Carbon Fiber Vinyl, Carbon Fiber Vinyl, 3D Carbon fiber film, 3D Carbon Fiber Vinyl Film, 3D Carbon Fiber Vinyl Sticker, Auto 3D carbon fiber vinyl, Self adhesive 3D carbon fiber vinyl film
Description:
1. Has a look & feel similar or better to carbon fiber bonnet and hard-top
2. Can be applied on interior and exterior surfaces of a car (hoods, trunks, side view mirrors etc.
3. Can be applied easily on all the common car paints
4. Cost-effective and can be cleaned with detergent and water.
5. Without residual glue on the car after remove
6. Service life for outdoor 4 years, indoor 12 years
7. Adhesive backing with air release technology for a bubble free installation
Installation Tips:
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles.
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles
Application:
Carbon fiber modification on engine hood, empennage, surrounding surface, car handle, rotary plate, etc. It's the desire of car fans.
Specification:
Film: 140micron PVC( meets ROHS).
Adhesive: 30u permanent clear( meets ROHS)
Rang temperature: -15c to +150c
Stretching of product: 26 to 33 pascal
Release paper: 120gsm air free bubbles single PE white paper.
Durability: Indoor 5-6 years; outdoor: 4 years.
Compatibility: Die cutting / car decoration/ architectural decoration.