1. Touchless car wash machine
2. CPU control
3. galvanizing by dipping
4. High speed
5,Labor saving,Half automative
Risense CH-200 series touchless car wash appearance is simple and generous,it is specially used to clean and air-dry for cars and various kinds of vans.The machine achieve full touchless cleaning which is hurtles for paint and
accessories of various vehicles;
It specially make use of imitating butterfly swing arm and can wash on the car surface thorough;
with the Japanese wax technology,it can wash strongly and computely,at the same time ,it can increase surface
brightness of car.
Adopting hand wipe shampoo and wax,shorten the wash time,which is a new choice for car wash industry
Feature:
Professional cleaning cars and all kings of mini-vans
Hand and machine is a perfect integrate
Imitating butterfly swing arm hi-pressure rotating clean
Hommization operation panel
Agent automatically dosing technology
Importing Japanese IKEUCHI hi-pressure nozzle
CPU control main board
Imported Japanese Colorful rinse
Technology parameters | Installation range | L6300mm×W4500mm(Optional minimum width 3450mm)
|
Moving range | L6200mm×W4500mm(Optional minimum width 3450mm) | |
Power requirement | 3PH AC380V50Hz 15KVA | |
Water source requirement | Pipe diameter DN25 rate of flow≥80L/min | |
Air supply requirement | Pressure0.75~0.9Mpa/rate of flow≥0.1m3/min | |
Ground evenness | Error≤10mm | |
Wash car type | Car \jeep\below 10 seats van | |
Wash size | L5.2m×W2.15m×H2.27m | |
Power consumption | 0.15kwh/set | |
Water consumption | 120L/set | |
Wash time | 2 roll over 1 minute 30seconds(not include hand wipe time) |