1.prestressed anchorage
2.oblate and flat; range from 1to 55holes
3.made by kinds of steelwires(9.53mm,12.7mm,17.8mm)
prestressed anchorage
1. type:KM series anchorage and wedge
2. round and flat anchorage range from 1to 55holes
3. for prestressing works
4. Size for pc strand:
M13 applies to 12.7mm, 12.5mm & 12.9mm pc strand |
M15 applies to 15.2 or 15.24mm, 15.7mm |
M18 applies to 17.8mm pc strand |
M22 applies to 21.6/21.8mm pc strand |
M11 applies to 10.8mm pc strand |
M10 applies to 9.3mm, 9.53mm pc strand; |
M7, M6, M5 apply to 7.0mm, 6.0mm, 5.0mm spiral ribbed pc wire. |
5. Other Parts for the pc strand: anchor ring/plate, base plate, sprial bar, bellows/corrugated pipe etc.
6. KM anchorage and wedge
KM anchorage system is a completed, independent building measure researched, IT has been widely adoped by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials. KM Series products are composed of tensioning anchor, holding anchor, connectors. It can be used to lock the steel strand wires on/under clases of 2000MPa standard strenght, which is usually in diameters of 12.7mm\12.9mm\15.2mm\15.7mm.
It has been verified by practice that various type of KM anchor also can be used for the different kinds of strand wires produced according to ASTM/BS/JIS/JIG/AS and other international strandards respectively only if its technical parameters shall marry the related detail materials.
We have our own anchor and wedge production base, our annual output is more than 2,000,000 sets. Enquiry please let us know your quantity, spec., hole quantity etc...
