H.264 Standalone DVR,
H.264 Network DVR,
8CH CCTV DVR CAMERA,
Support multilingual operation system,
Support 1/2/4/8 ch.
8ch H.264 Network Standalone CCTV DVR Digital Video Recorder
Features:
l H. 264.triplex real time Professional DVR
l Graphical interface
l Support 1/2/4/8 ch simultaneous playback
l Multiple operation modes, support any channel playback under real time surveillance
l Support 3G mobile phone surveillance and E-mail function
l Support D1 an CIF resolution record
l Support multilingual operation system
Technical Parameter
Compression standard | H.264 baseline |
Video input | Composite 1.0Vp-p/75Ω,BNC×4/ BNC×8 |
Video output | Composite 1.0Vp-p/75Ω,BNC×1; Super Video×1; VGA×1 |
Resolution | Preview 720×576(PAL),720×480(NTSC) 352×288(PAL),320×240(NTSC) Recording 720×576(PAL),720×480(NTSC) 352×288(PAL),320×240(NTSC) |
Bit rate | Preview/ recording 8ch 200fps(PAL), 240fps(NTSC) |
Audio input | -8dB~22k,RCAx4(4ch), RCAx4(4ch) |
Audio output | -8dB~92dB,RCAx1 |
Audio decode | ADPCM |
Alarm input | Input low level alarm, user setting normal open or normal close, 8ch input |
Alarm output | 1ch output(4CH DVR) 2ch output(8CH DVR) |
Recording mode | Manual recording, timing recording , motion detection recording and external alarm recording |
Simplex/duplex/ triplex | triplex(recording, playback , LAN transmission) |
LAN | RJ45(10M/100M self-adapting) |
PTZ control | Yes |
Communication | RS485×1,USB2.0×1 |
USB | USB mouse control |
Hard disk drive | 1x SATA(2TB or above) |
Remote control unit | Yes |
Dimension | Main board size : 220mm x 112mm |
Power supply | AC110-230V |
l Power
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;
l safety
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break down, please ask the qualified technician to check and repair, or contact with the agents of it.
l Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source, or where the direct sunlight, too much dust, or mechanical vibration or attack;
