IR CUT;
Use Easy;
3.6mm lens;

3.6mm lens ICR

Specifications for 3.6mm lens IR cut Switching Mechanism

1.Diameter of aperture : 16.4 X Φ16.2mm

2.While power is turned off, automatic return by coil.

3.While power is turned off, the IR cut filter (blue) is positioned at the aperture.

4.Working voltage : min 5.0V

5.Working posture: Operates normally at every posture.

6.When voltage is turned off with the IR Cut filter (clear) positioned at the aperture, the IR cut filter (blue ) not return to aperture until resume power.

7.Coil resistance : 40  ± 10% (At 25 °C)

8.Polarity :  Pin No. 1 Blue Wire Driving +

                  :  Pin No. 2 Black Wire Driving –

9.Allowable current : 120mA max

10.Connectors: Molex Japan 51021-0200

11.Lead wires : UL-3302 AWG30

12.IR cut filter (blue) glass: Φ4mm With IR coating

13.Scratches and smears: Visible scratches, smears or attached dirt are not permitted at the time of shipment.

14.Electrostatic protection measures are taken at the time of assembly

15.Electrical insulation resistance

        The insulation resistance among the three, i.e. Driving coils. yokes and main body (holder) is mutually not less than 50M at 500VDC

16.Ordinary operation is performed at between  -20 °C ~ +80°C

17.Fix the product on the excitation stand and apply to the product fixed on the excitation stand simple harmonic vibration of 1200~3300 per min. in total amplitude of 1mm that varies continuously at the speed of the frequency of 2 min. or more through 3 min. or less vertically, horizontally and longitudinally for 20 min. in each direction. And the product still satisfies the specifications.

18.Fix the product on the drop table and drop the table 6 times in total, one for each direction so that the drop table is subjected to a shock of 30G, and the product still satisfies the specifications.

19.Perform operation of the product under a normal voltage with100,000 times of ON / OFF switching, and the product still satisfies the specifications.