1) 1w led MR bulb
2) high power SMD led spotlight
3) long lifespan
4) eco-friendly, with CE & Rohs
Applications
Mr16 LED light is good choice for Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations
Specifications
light source | edision high power | color temperature | cool white 5600~7200k warm white 2800~3500k |
input voltage | AC/DC12v | luminous flux | cool white 80lm warm white 60lm |
dielectric strength | 5s@1000VAC,5mA | working temp. | -37~55 degree |
power dissipation | 1.4w | storage temp. | -40~85 degree |
light effect | 57lm/w | working humidity | 30% ~85% |
beam angle | 30 degree | storage humidity | 10%~90% |
life | 20000 hrs | color rendering index | 75 |
material | aluminum | certificate | CE, Rohs |
defence grade | IP40 | net weight | 0.06kg |
Lumen Decrease
Dimension
Attention
The working voltage for LED bulb light is AC90-260V. Please make sure the working voltage is AC90-260V before you connected the led spot light to the power supply. Connection to higher voltage will result in permanent damage. According to the required amount of bulb light estimated firstly and rated voltage of every single MR16 led light, calculate the total power and design the distribution program. The power supply for the bulb light is 220V; prohibit any contact to the metal part of bulb base after connected to the power supply to avoid the electric shock. Please check whether any LED spot light damage caused by delivery or not before you unpacked and prepare to use the MR16 bulb. If yes, please don’t use it and inform the supplier. The products can only be used in good condition. Please follow the constructions and cautions on the leaflet so as to ensure the safe usage and the good condition of products. Any damage or defect caused by failure to comply with the leaflet is out of the supplier’s responsibility.Please don’t connect the bulb light to the power supply promptly when the environmental temperature is surging because the origin generated heat stream can spoil the products. You are strongly recommended to do the connection after the product is in room temperature. Before installation, please make sure that the installation location can fully support the product. The products should be installed in plat place resisting to shock, swing, and fire.Because outer covering temperature can amount to 50°C, keep the bulbs any from these heat-sensitive equipments. LED product is sensitive to environmental temperature and its life will be greatly shortened whenever the working temperature is over50°C. So please keep the product away from the heat origins and keep it working in a venting condition to ensure the proper environmental temperature. Product’s life is longer under 25°C working temperature.