DRYER (ISO9001)
1. suit for many feilds
2. high efficiency, good effect
3. easy to practice
4. long use time, economical
High quality three cylinders rotary drum dryer
Size:
Can be designed according to client's capacity.
Usage:
Widely used to dry yellow sand, clay, slag, flyash, , iron powder,sand in casting, ect.
Investment:
Low consumption, adpot the alloy steel plate whose abrasion resistance is 3-4 times than common steel plate, but the investment is 1/6 of foreign brand.
Work condition:
The material initial moisture is 15%, final is below 0.5-1.0%, is the first choice for the slag in the cement factories and premixed dry mortar production line.
The material granular size is around 20-40mm.
Installation and practice:
Compared with single cylinder dryer, reduce about 50% area, the groundwork consumption reduce a half. The whole equipments have no leakage, can finish the installation in 2 hours, and easy to pratice in following period.
Model | 2.2*7.0 | 2.6*6.0 | 2.6*7.0 | 2.8*7.0 | 3.0*7.0 | 3.2*7.0 | 3.6*8.0 | 3.8*8.0 | ||
Diameter of outer cylinder | m | 2.2 | 2.6 | 2.6 | 2.8 | 3.0 | 3.2 | 3.6 | 3.8 | |
Length of outer cylinder | m | 7.0 | 6.0 | 7.0 | 7.0 | 7.0 | 7.0 | 8.0 | 8.0 | |
Cylinder volume | m3 | 26.59 | 31.84 | 31.84 | 36.93 | 52.68 | 56.27 | 81.38 | 90.68 | |
Cylinder speed | rpm | 4~10 | ||||||||
Initial moisture of slag | % | 10~12 | ||||||||
Final moisture of slag | % | 1 | ||||||||
Initial moisture of yellow sand | % | 8-10 | ||||||||
Final moisture of yellow sand | % | 0.5-1 | ||||||||
Max. inlet temperature | °C | 700-750 | ||||||||
Capacity | Slag(t/h) | 20~25 | 25~28 | 26~29 | 28~32 | 40~45 | 42~46 | 55~65 | 65~70 | |
Yellow sand(t/h) | 22~26 | 25~30 | 26~32 | 30~35 | 45~48 | 45~50 | 60~70 | 70~75 | ||
Motor | / | Y132-S-4 | Y132-S-4 | Y132-S-4 | Y132-M-4 | Y160-M-4 | Y160-M-4 | Y160-M-4 | Y180-M-4 | |
Power | kw | 5.5 | 5.5 | 5.5 | 7.5 | 11 | 11 | 15 | 18.5 | |
Reductor |
| XWD6-23 | XWD7-23 | XWD8-23 | ||||||
Reductor ratio | 1 | 29 | ||||||||
