1.Power type: Single cylinder, two-stroke, air-cooled
2.Power: 3.9kw/9500rpm
3.Carrying type:hand hold
4.Displacement:71.7C
52cc/45cc/38cc/25cc / chain saw.
52cc chain saw.forest tool.chain saw are new products .
product detail:
Displacement:71.7cc |
Fuel:two cycle oil gasoline: 25:1 |
Fuel tank capacity:770ml |
Carburetor: Pump-film type |
Ignition: CDI |
Power: 3.9kw/9500rpm |
Oil feeding system: Automatic pump with adjuster |
Bar length: 20" 22" 24" |
Saw chain pitch:3"/8" |
Gasoline Chain Saw Precautions:
1) Must be familiar with before using the chain saw manual, in strict accordance with the requirements of operating instructions to ensure the safety of the product and the life.
2) guides the chain during the installation process should pay attention to the tightness (hand pull the chain, the chain and guide spacing of 1 cm), or affect the results.
3) Mixture of gasoline and oil than 25:1, but due to regional differences in the quality of oil, we recommend a ratio of 20:1, recommended engine oil for the Mobil brand two-stroke engine oil.
4) Use chain saw for the first time,it must first start the machine 5 minutes, after starting work.
5) Chain saws started, must wait for the chain guide under the oil then beginning work(oil pump).
6) Affected by the transport chain saw may be screw loose, again according to the instructions before use regulation, in general, not recommended disassemble.
7) After every 100 hours of carburetor must be cleaned before use.
8) Working eight hours after the air filter must be cleaned.
9) Chain should be replaced with a blunt or a good file with a file and then use, or affect the results and the chain saw life.
10) Chain saws when not in use is best to use plastic bottles, to avoid dust and moisture into the machine, affecting.
11) Chain saws when not in use is best to use plastic bottles, to avoid dust and moisture into the machine, affecting.
12) 25F chainsaw largest guide the chain's configuration is: 12 inches; 45F chainsaw largest guide chain configurations: 18 inch; 52F chainsaw largest guide chain configuration for 20-inch; 62F chainsaw largest guide chain configuration for 22 inch over the range of possible machine configurations temperature, then turn off, use effect and affect machine life (summer use of the above models, guides the chain to be reduced by 2 inches for the benefit).
welcome to inquire
