Battery Charger
Minimum Order: 0
Quality/Safety Certification: 0.00
Efficiency: More than 85%(load current of charger is 3.0A) ;
Input Voltage:100~240VAC;
Frequency: 47Hz-63Hz
Charger
MUD-H1(24V3.0A) is Intelligent 3-Phase Charger for power battery
Charger
| Output Charging Current (limited current), | ||||||||||
| Rating charging current is DC 3.0A ,in range DC 2.8A----3.1A. | ||||||||||
| LED Display, | ||||||||||
| 1st step , LED → green (indicates power on) | ||||||||||
| 2nd step,LED → red (indicates bulk charge) | ||||||||||
| 3rd step, LED → green (means battery is ready to use and charge turns to float charge stage) | ||||||||||
| Output Charging Characteristic | ||||||||||
| Note, this chart is for 12V14AH battery, 2pc use, for other 12V battery, the charging time should be adjusted accordingly. | ||||||||||
| Short Circuit Protection,This charger wouldn’t be damaged in any time of short circuit. | ||||||||||
| Stability of Circuit,within the input voltage range, the charger will keep a stable performance whilst under any load; | ||||||||||
| Caution,the charger would be damaged if bettery misinput charger’s plus and minus. | ||||||||||
| Mechanism Characteristic, | ||||||||||
| Materials used in construction | ||||||||||
| Case,PC+ABS black, with brochure and label | ||||||||||
| Input Plug,UL standard plug, 0.75*2 AC cable, length 1.2m,Output cable: AWG18# . PVC,1.2m black | ||||||||||
| Dimensions,L153mm W 72mm H 46mm | ||||||||||
| Dropping Test | ||||||||||
| Charger dropped from 1.0m height to a 10mm pine board, repeat it for 4times with charger each side. | ||||||||||
| Result, no crack / break, no parts become flexible or not fastened, all related data remains correct. With the height of 1.0m, charger fall off to 10mm pine board, 4 times/ each face. | ||||||||||
| Vibration Test | ||||||||||
| The charger was placed upon a Vibration desk, | ||||||||||
| Frequency, 5-55Hz | ||||||||||
| Range,±1.5mm | ||||||||||
| Acceleration: 20m/s Direction, | ||||||||||
| X/Y/Z 3 directions Test Time, | ||||||||||
| 1h respectively | ||||||||||
| Result,no any damage/degeneration, all related data remains correct. | ||||||||||
| High Voltage characteristics, | ||||||||||
| A high voltage of 3,000VAC between input and output terminal,current leak is lower than | ||||||||||
| 10mA,continue 60 seconds, 1 second for production line. | ||||||||||
| Stock Environment,Temperature , -25°C----+70°C,Humidity,5% - 90% | ||||||||||
| Work Environment,Temperature,- 0°C----+40°C, Humidity,5% - 90% | ||||||||||
