RFBB2 is a portable power station suitable for iPhone, iPod, iPad and other digital devices.

Product name: Portable Power StationModel No.: RFBB2 Summary:RFBB2 is a portable power station, having the features below:1) with a common usb output jack2) suitable for iPhone, iPod, iPad and other digital devices3) built-in high capacity lithium polymer battery packs4) can increase the endurance of electrical equipments strongly5) good companions for your mobile phones and other digital gadgets6) have laser light and flashligh function Basic Parameters:1) Dimensions: 100x61x35mm2) Weight: 128g3) Input: 5V  600mA4) Output: 5V  1A5) Capacity: 3200mAh6) Others: lower power consumption in standby modes, over-temperature protection, overload protection, over-discharge protection and over-charge protection  Structure:Accessories:1 x power adapter1 x usb adapter9 x connector Operation Instruction:This product should only be used under the temperature and the RH required. It is not allowed to be used in water.Charge operation:Charge RFBB2 via AC adapter:1) Cut power supply from the electrical equipment2) Connect the adapter to AC power3) LEDs blink circularly when you plug the connector of the adapter into mini USB port4) All LEDs are on when the charge is finishedCharge RFBB2 via USB port of computer:1) Cut power supply from the electrical equipment2) Connect one end of the USB cable to computer3) LEDs blink circularly when you plug the other end of USB cable into mini USB port of RFBB24) All LEDs are on when the charger is finishedPower Supply Operation:1) Move the AC adapter2) Plug charging cable into USB port of RFBB13) Press the on/off button for 3 seconds4) LEDs indicate remaining capacity5) USB output with 5V6) Connect with electrical equipment7) Charge startsSpotlight operation:Switch on:* The spotlight will be on after a long press for the control button* The spotlight will last being on for 5 seconds after a short press for the control buttonswitch off:The spotlight will be off after a short press for the control buttonAdditional Specification:1) Charge and discharge can not go on together.2) Electrical equipments or something external may cause the product going to protective status. In this case, the LEDs can not indicate the remaining capacity even if you press the button for 3 seconds.In order to release the protection, you should remove the electrical equipment and then connect with the adapter which has been connected to AC power.3) LED indication:4) The product will stop working when the temperature is too high and will start working again when it comes down to normal.5) Button operation:A long press (3 seconds or above): starup usb outputA short press (less than 3 seconds) over power supply: turn on / off LEDs indication6) USB output will close after 30 seconds if no electrical equipment is connected7) LEDs indication only lasts for 10 seconds during power supply. Giving a short press, you can check the remaining capacity again. Cautions:1) Use the fitted adapter. Nonstandard adapters might lead to working disability.2) The product should be used and kept under the required temperatures and RH.3) Keeping the product with enough remaining capacity if you leave it for a long time.4) Do not drop or put something heavy on it.5) Children are not allowed to use the product without adults.6) Do not keep the product under the direct rays, beside the hot devices or in other hot environment.7) Do not disassemble or assemble the product.